June 2020 Archives by author
Starting: Mon Jun 1 18:30:49 EDT 2020
Ending: Tue Jun 30 22:46:59 EDT 2020
Messages: 81
- Cannot get FIQ to work properly on raspberry zero
Sietse Achterop
- Generic way for verifying GPIO wakeup capability
Pintu Agarwal
- Generic way for verifying GPIO wakeup capability
Pintu Agarwal
- Git pull and untracked files
Gautam Bhat
- Advice about the linux kernel development process
Oscar Carter
- Advice about the linux kernel development process
Oscar Carter
- [staging-testing] drivers/staging/wfx/hif_tx.c
Mohamed Dawod
- the cost of EXPORT_SYMBOL_GPL
Ahmad Fatoum
- Current Instruction Pointer Along Memory Access for A specific Process
Garrit Franke
- Crash recovery kernel error
Sebastian Fricke
- issue with ASUS Fan maximal mode
Sergey Ivanov
- Current Instruction Pointer Along Memory Access for A specific Process
Greg KH
- the cost of EXPORT_SYMBOL_GPL
Greg KH
- the cost of EXPORT_SYMBOL_GPL
Greg KH
- the cost of EXPORT_SYMBOL_GPL
Greg KH
- the cost of EXPORT_SYMBOL_GPL
Greg KH
- the cost of EXPORT_SYMBOL_GPL
Greg KH
- the cost of EXPORT_SYMBOL_GPL
Greg KH
- DKMS module and recipe for target '.../virtualbox/5.2.34/build/vboxdrv' failed
Greg KH
- Advice about the linux kernel development process
Greg KH
- Are there some potential problems that I should be aware of if I allocate the memory which doesn't have any relation to peripheral hardwares(i.e. DMA, PCI, serial port and etc) by vmalloc() instead of kmalloc()?
Greg KH
- Are there some potential problems that I should be aware of if I allocate the memory which doesn't have any relation to peripheral hardwares(i.e. DMA, PCI, serial port and etc) by vmalloc() instead of kmalloc()?
Greg KH
- Are there some potential problems that I should be aware of if I allocate the memory which doesn't have any relation to peripheral hardwares(i.e. DMA, PCI, serial port and etc) by vmalloc() instead of kmalloc()?
Greg KH
- Are there some potential problems that I should be aware of if I allocate the memory which doesn't have any relation to peripheral hardwares(i.e. DMA, PCI, serial port and etc) by vmalloc() instead of kmalloc()?
Greg KH
- Where to place my driver
Greg KH
- the cost of EXPORT_SYMBOL_GPL
Martin Kaiser
- IPX support
Valdis Kl=?utf-8?Q?=c4=93?=tnieks
- sticky bits in /proc etc
Valdis Kl=?utf-8?Q?=c4=93?=tnieks
- replacing if-then-else strcmp ladders with switch cases
Valdis Kl=?utf-8?Q?=c4=93?=tnieks
- the cost of EXPORT_SYMBOL_GPL
Valdis Kl=?utf-8?Q?=c4=93?=tnieks
- the cost of EXPORT_SYMBOL_GPL
Valdis Kl=?utf-8?Q?=c4=93?=tnieks
- the cost of EXPORT_SYMBOL_GPL
Valdis Kl=?utf-8?Q?=c4=93?=tnieks
- DKMS module and recipe for target '.../virtualbox/5.2.34/build/vboxdrv' failed
Valdis Kl=?utf-8?Q?=c4=93?=tnieks
- Why does âpage allocation failureâ occur whereas there are still â58*4096kB (C)â could be used?
Valdis Kl=?utf-8?Q?=c4=93?=tnieks
- Why does âpage allocation failureâ occur whereas there are still â58*4096kB (C)â could be used?
Valdis Kl=?utf-8?Q?=c4=93?=tnieks
- There is a question mark in front of the function name in the call trace log.What does the question mark imply?
Valdis Kl=?utf-8?Q?=c4=93?=tnieks
- How do you comprehend the saying that the kernel's memory is not pageable whereas get_free_page use a page-oriented technique?
Valdis Kl=?utf-8?Q?=c4=93?=tnieks
- Why does âpage allocation failureâ occur whereas there are still â58*4096kB (C)â could be used?
Valdis Kl=?utf-8?Q?=c4=93?=tnieks
- Are there some potential problems that I should be aware of if I allocate the memory which doesn't have any relation to peripheral hardwares(i.e. DMA, PCI, serial port and etc) by vmalloc() instead of kmalloc()?
Valdis Kl=?utf-8?Q?=c4=93?=tnieks
- Git pull and untracked files
Valdis Kl=?utf-8?Q?=c4=93?=tnieks
- Git pull and untracked files
Valdis Kl=?utf-8?Q?=c4=93?=tnieks
- the cost of EXPORT_SYMBOL_GPL
Tomek The Messenger
- the cost of EXPORT_SYMBOL_GPL
Tomek The Messenger
- the cost of EXPORT_SYMBOL_GPL
Tomek The Messenger
- the cost of EXPORT_SYMBOL_GPL
Tomek The Messenger
- the cost of EXPORT_SYMBOL_GPL
Tomek The Messenger
- the cost of EXPORT_SYMBOL_GPL
Tomek The Messenger
- the cost of EXPORT_SYMBOL_GPL
Tomek The Messenger
- IPX support
Dmitry Podgorny
- [staging-testing] drivers/staging/wfx/hif_tx.c
Jérôme Pouiller
- Crash recovery kernel error
Mulyadi Santosa
- DKMS module and recipe for target '.../virtualbox/5.2.34/build/vboxdrv' failed
Jeffrey Walton
- DKMS module and recipe for target '.../virtualbox/5.2.34/build/vboxdrv' failed
Jeffrey Walton
- Where to place my driver
jaap aarts
- Crash recovery kernel error
Harsh chopra
- Crash recovery kernel error
Harsh chopra
- sticky bits in /proc etc
jim.cromie at gmail.com
- sticky bits in /proc etc
jim.cromie at gmail.com
- replacing if-then-else strcmp ladders with switch cases
jim.cromie at gmail.com
- replacing if-then-else strcmp ladders with switch cases
jim.cromie at gmail.com
- Re: Why does “page allocation failure” occur whereas there are still “58*4096kB (C)” could be used?
孙世龙 sunshilong
- Why the kernel could not use the memory block contained by "Node 0 DMA" while the argument of kzalloc() is "GFP_KERNEL"?
孙世龙 sunshilong
- Why did not the kernel use the memory block named by "Node 0 DMA" while the argument of funtion kzalloc is "GFP_KERNEL"?
孙世龙 sunshilong
- About the uage of "__GFP_COMP"?
孙世龙 sunshilong
- What the differences between "__GFP_NOFAIL" and "__GFP_REPEAT"?
孙世龙 sunshilong
- Re: Why does “page allocation failure” occur whereas there are still “58*4096kB (C)” could be used?
孙世龙 sunshilong
- How do you comprehend the saying that the kernel's memory is not pageable whereas get_free_page use a page-oriented technique?
孙世龙 sunshilong
- How do you comprehend the saying that the kernel's memory is not pageable whereas get_free_page use a page-oriented technique?
孙世龙 sunshilong
- What are the potential problems if the option CONFIG_MIGRATION is disabled?
孙世龙 sunshilong
- Are there still some methods that could be used by the Linux kernel to reduce memory fragmentation while both CONFIG-MIGRATION and CONFIG-COMPACTION are disabled?
孙世龙 sunshilong
- Besides kmalloc() is more efficient, are there some potential problems that I should be aware of if I allocate the memory which doesn't have any relation to peripheral hardwares(i.e. DMA,PCI,serial port and etc) by vmalloc() instead of kmalloc() to avoid the page allocation failure?
孙世龙 sunshilong
- Are there some potential problems that I should be aware of if I allocate the memory which doesn't have any relation to peripheral hardwares(i.e. DMA, PCI, serial port and etc) by vmalloc() instead of kmalloc()?
孙世龙 sunshilong
- Are there some potential problems that I should be aware of if I allocate the memory which doesn't have any relation to peripheral hardwares(i.e. DMA, PCI, serial port and etc) by vmalloc() instead of kmalloc()?
孙世龙 sunshilong
- Are there some potential problems that I should be aware of if I allocate the memory which doesn't have any relation to peripheral hardwares(i.e. DMA, PCI, serial port and etc) by vmalloc() instead of kmalloc()?
孙世龙 sunshilong
- Are there some potential problems that I should be aware of if I allocate the memory which doesn't have any relation to peripheral hardwares(i.e. DMA, PCI, serial port and etc) by vmalloc() instead of kmalloc()?
孙世龙 sunshilong
- Is there some method or software that could purposely generate a lot of physical memory fragmentations on linux?
孙世龙 sunshilong
- How do you investigate the cause of total hang? Is there some information that I should pay attention to in order to get some hint?
孙世龙 sunshilong
- Why does “page allocation failure” occur whereas there are still “58*4096kB (C)” could be used?
孙世龙
- There is a question mark in front of the function name in the call trace log.What does the question mark imply?
孙世龙
- Current Instruction Pointer Along Memory Access for A specific Process
Irfan Ullah (울라 이르판)
- Current Instruction Pointer Along Memory Access for A specific Process
Irfan Ullah (울라 이르판)
Last message date:
Tue Jun 30 22:46:59 EDT 2020
Archived on: Tue Jun 30 22:47:17 EDT 2020
This archive was generated by
Pipermail 0.09 (Mailman edition).