Just to be sure... I just downloaded a clean copy of kernel 3.6.9. I then configured it for UAC1 and the USB Audio Gadget. I rebuilt and installed the g_audio loadable module. Again I get the 'This device cannot start (code 10)' Error when I connect windows 7. My expectation is that that this should work with the default windows drivers - Is this correct. Thanks for your help. Eamon. -----Original Message----- From: kernelnewbies-bounces@kernelnewbies.org [mailto:kernelnewbies-bounces@kernelnewbies.org] On Behalf Of Eamon Hayden Sent: Wednesday, June 05, 2013 8:42 AM To: 'Jassi Brar'; 'anish singh' Cc: alsa-devel@alsa-project.org; 'kernelnewbies' Subject: RE: [alsa-devel] USB audio Gadget - code 10 error I've tried both UAC1 and UAC2 at this stage and both give the same result. -----Original Message----- From: Jassi Brar [mailto:jassisinghbrar@gmail.com] Sent: Wednesday, June 05, 2013 4:29 AM To: anish singh Cc: Eamon Hayden; alsa-devel@alsa-project.org; kernelnewbies Subject: Re: [alsa-devel] USB audio Gadget - code 10 error
On Tue, Jun 4, 2013 at 10:35 PM, Eamon Hayden <eamon.hayden@cloudiumsystems.com> wrote:
I’m trying to use the linux usb audio gadget but I get the error : “This device cannot start (code 10) when I connect to a windows 7/8 box. I don’t have this problem when I connect to ubunto 12.0.4
You didn't tell if you are trying UAC1 or UAC2 ? The latter won't work as such because iirc Windows don't support UAC2 natively (you'll have to load some 3rd part divers).
-j _______________________________________________ Kernelnewbies mailing list Kernelnewbies@kernelnewbies.org http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies