Hi Chetan, On Thu, May 3, 2012 at 3:35 PM, Chetan Nanda <chetannanda@gmail.com> wrote:
Hi,
We are working on ARM based SOC. Currently we are implementing a efficient tracing mechanism to logs messages from a dedicated MCU.
For this, we share a circular buffer between ARM and MCU and messages stored in the buffer will be put into kernel ring-buffer and then output via dmesg call. Strangely wringing a single log message in the kernel ring-buffer cost around 6-8ms.
Consider this situvation, if your do a printk message of 100 characters at a baud rate of 115200 bps on your UART console. Now 1 bit it will take 8.68 us(ie.. 1/115200). So 100 character ie.. 800 bits(exculuding parity, stop bits and all other over heads) will take 8.68 us * 800 = 6.94 ms. How are you writing to the kernel log buffer? Are you using UART as console? If yes what is your baud rate? If possible give more details about your design. Thanks, Arun
Please help to confirm this, or we are doing something wrong.
Thanks, Chetan Nanda
_______________________________________________ Kernelnewbies mailing list Kernelnewbies@kernelnewbies.org http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies