Hi, I am implementing the rx/tx paths for a network driver. My current understanding is; On the tx path the driver processes the sk_buff, producing a frame, and writes this to the tx buffer. At interrupt time (given that the device produces interrupts for rx data received and tx data transmitted) the driver either fills the rx buffer with the received frame read from the device or empties the tx buffer and writes the frame to the device. Once rx data has been written to the buffer the driver should empty the rx buffer, process the frame and pass it upstairs. Questions --------- 1. Is it ok to process the rx frame in a tasklet or should the tasklet schedule a work thread to do it so that we are not in software interrupt context for the entire processing of the frame? 2. Can you us kfifo.h for varying size discreet chunks of data? The macros in kfifo.h are quite complex for a kernelnewbie, but it seems that kfifo is better suited to storing fixed size items (i.e stucts)? 3. If the above buffer handling is correct then the data being written to the rx and tx buffers is of varying size. Is circ_buf.h combined with buffer in the device data structure a better option? For reference, paraphrasing LDD3: For interrupt driven I/O the input buffer should be filled at interrupt time and emptied by processes that read the device; the output buffer should be filled by processes that write to the device and emptied at interrupt time. thanks, Tobin.