From: Gabriel Somlo <somlo@cmu.edu> Make fw_cfg entries of type "file" available via sysfs. Entries are listed under /sys/firmware/qemu_fw_cfg/by_key, in folders named after each entry's selector key. Filename, selector value, and size read-only attributes are included for each entry. Also, a "raw" attribute allows retrieval of the full binary content of each entry. This patch also provides a documentation file outlining the guest-side "hardware" interface exposed by the QEMU fw_cfg device. Signed-off-by: Gabriel Somlo <somlo@cmu.edu> --- .../ABI/testing/sysfs-firmware-qemu_fw_cfg | 167 ++++++++ drivers/firmware/Kconfig | 10 + drivers/firmware/Makefile | 1 + drivers/firmware/qemu_fw_cfg.c | 456 +++++++++++++++++++++ 4 files changed, 634 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg create mode 100644 drivers/firmware/qemu_fw_cfg.c diff --git a/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg b/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg new file mode 100644 index 0000000..f1ef44e --- /dev/null +++ b/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg @@ -0,0 +1,167 @@ +What: /sys/firmware/qemu_fw_cfg/ +Date: August 2015 +Contact: Gabriel Somlo <somlo@cmu.edu> +Description: + Several different architectures supported by QEMU (x86, arm, + sun4*, ppc/mac) are provisioned with a firmware configuration + (fw_cfg) device, used by the host to provide configuration data + to the starting guest. While most of this data is meant for use + by the guest firmware, starting with QEMU v2.4, guest VMs may + be given arbitrary fw_cfg entries supplied directly on the + command line, which therefore may be of interest to userspace. + + === Guest-side Hardware Interface === + + The fw_cfg device is available to guest VMs as a register pair + (control and data), accessible as either a IO ports or as MMIO + addresses, depending on the architecture. + + --- Control Register --- + + Width: 16-bit + Access: Write-Only + Endianness: LE (if IOport) or BE (if MMIO) + + A write to the control register selects the index for one of + the firmware configuration items (or "blobs") available on the + fw_cfg device, which can subsequently be read from the data + register. + + Each time the control register is written, an data offset + internal to the fw_cfg device will be set to zero. This data + offset impacts which portion of the selected fw_cfg blob is + accessed by reading the data register, as explained below. + + --- Data Register --- + + Width: 8-bit (if IOport), or 8/16/32/64-bit (if MMIO) + Access: Read-Only + Endianness: string preserving + + The data register allows access to an array of bytes which + represent the fw_cfg blob last selected by a write to the + control register. + + Immediately following a write to the control register, the data + offset will be set to zero. Each successful read access to the + data register will increment the data offset by the appropriate + access width. + + Each fw_cfg blob has a maximum associated data length. Once the + data offset exceeds this maximum length, any subsequent reads + via the data register will return 0x00. + + An N-byte wide read of the data register will return the next + available N bytes of the selected fw_cfg blob, as a substring, + in increasing address order, similar to memcpy(), zero-padded + if necessary should the maximum data length of the selected + item be reached, as described above. + + --- Per-arch Register Details --- + + ------------------------------------------------------------- + arch access base ctrl ctrl data max. + mode address offset endian offset data + (bytes) (bytes) + ------------------------------------------------------------- + x86* IOport 0x510 0 LE 1 1 + arm MMIO 0x9020000 8 BE 0 8 + sun4u IOport 0x510 0 LE 1 1 + sun4m MMIO 0xd00000510 0 BE 2 1 + ppc/mac MMIO 0xf0000510 0 BE 2 1 + ------------------------------------------------------------- + + NOTE 1. On platforms where the fw_cfg registers are exposed as + IO ports, the data port number will always be one greater than + the port number of the control register. I.e., the two ports + are overlapping, and can not be mapped separately. + + === Firmware Configuration Items of Interest === + + Originally, the index key, size, and formatting of blobs in + fw_cfg was hard coded by mutual agreement between QEMU on the + host side, and the guest-side firmware. Later on, a file + transfer interface was added: by reading a special blob, the + fw_cfg consumer can retrieve a list of records containing the + name, selector key, and size of further fw_cfg blobs made + available by the host. Below we describe three fw_cfg blobs + of interest to the sysfs driver. + + --- Signature (Key 0x0000, FW_CFG_SIGNATURE) --- + + The presence of the fw_cfg device can be verified by selecting + the signature blob by writing 0x0000 to the control register, + and reading four bytes from the data register. If the fw_cfg + device is present, the four bytes read will match the ASCII + characters "QEMU". + + --- Revision (Key 0x0001, FW_CFG_ID) --- + + A 32-bit little-endian unsigned integer, this item is used as + an interface revision number. + + --- File Directory (Key 0x0019, FW_CFG_FILE_DIR) --- + + Any fw_cfg blobs stored at key 0x0020 FW_CFG_FILE_FIRST() or + higher will have an associated entry in this "directory" blob, + which facilitates the discovery of available items by software + (e.g. BIOS) running on the guest. The format of the directory + blob is shown below. + + NOTE: All integers are stored in big-endian format! + + /* the entire file directory "blob" */ + struct FWCfgFiles { + u32 count; /* total number of entries */ + struct FWCfgFile f[]; /* entry array, see below */ + }; + + /* an individual directory entry, 64 bytes total */ + struct FWCfgFile { + u32 size; /* size of referenced blob */ + u16 select; /* selector key for referenced blob */ + u16 reserved; + char name[56]; /* blob name, nul-terminated ASCII */ + }; + + === SysFS fw_cfg Interface === + + The fw_cfg sysfs interface described in this document is only + intended to display discoverable blobs (i.e., those registered + with the file directory), as there is no way to determine the + presence or size of "legacy" blobs (with selector keys between + 0x0002 and 0x0018) programmatically. + + All fw_cfg information is shown under: + + /sys/firmware/qemu_fw_cfg/ + + The only legacy blob displayed is the fw_cfg device revision: + + /sys/firmware/qemu_fw_cfg/rev + + --- Discoverable fw_cfg blobs by selector key --- + + All discoverable blobs listed in the fw_cfg file directory are + displayed as entries named after their unique selector key + value, e.g.: + + /sys/firmware/qemu_fw_cfg/by_key/32 + /sys/firmware/qemu_fw_cfg/by_key/33 + /sys/firmware/qemu_fw_cfg/by_key/34 + ... + + Each such fw_cfg sysfs entry has the following values exported + as attributes: + + name : The 56-byte nul-terminated ASCII string used as the + blob's 'file name' in the fw_cfg directory. + size : The length of the blob, as given in the fw_cfg + directory. + key : The value of the blob's selector key as given in the + fw_cfg directory. This value is the same as used in + the parent directory name. + raw : The raw bytes of the blob, obtained by selecting the + entry via the control register, and reading a number + of bytes equal to the blob size from the data + register. diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index 665efca..0466e80 100644 --- a/drivers/firmware/Kconfig +++ b/drivers/firmware/Kconfig @@ -135,6 +135,16 @@ config ISCSI_IBFT detect iSCSI boot parameters dynamically during system boot, say Y. Otherwise, say N. +config FW_CFG_SYSFS + tristate "QEMU fw_cfg device support in sysfs" + depends on SYSFS + default n + help + Say Y or M here to enable the exporting of the QEMU firmware + configuration (fw_cfg) file entries via sysfs. Entries are + found under /sys/firmware/fw_cfg when this option is enabled + and loaded. + config QCOM_SCM bool depends on ARM || ARM64 diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile index 2ee8347..efba22a 100644 --- a/drivers/firmware/Makefile +++ b/drivers/firmware/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_DMIID) += dmi-id.o obj-$(CONFIG_ISCSI_IBFT_FIND) += iscsi_ibft_find.o obj-$(CONFIG_ISCSI_IBFT) += iscsi_ibft.o obj-$(CONFIG_FIRMWARE_MEMMAP) += memmap.o +obj-$(CONFIG_FW_CFG_SYSFS) += qemu_fw_cfg.o obj-$(CONFIG_QCOM_SCM) += qcom_scm.o obj-$(CONFIG_QCOM_SCM_64) += qcom_scm-64.o obj-$(CONFIG_QCOM_SCM_32) += qcom_scm-32.o diff --git a/drivers/firmware/qemu_fw_cfg.c b/drivers/firmware/qemu_fw_cfg.c new file mode 100644 index 0000000..3a67a16 --- /dev/null +++ b/drivers/firmware/qemu_fw_cfg.c @@ -0,0 +1,456 @@ +/* + * drivers/firmware/qemu_fw_cfg.c + * + * Expose entries from QEMU's firmware configuration (fw_cfg) device in + * sysfs (read-only, under "/sys/firmware/qemu_fw_cfg/..."). + * + * Copyright 2015 Carnegie Mellon University + */ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/ioport.h> + +MODULE_AUTHOR("Gabriel L. Somlo <somlo@cmu.edu>"); +MODULE_DESCRIPTION("QEMU fw_cfg sysfs support"); +MODULE_LICENSE("GPL"); + +/* selector key values for "well-known" fw_cfg entries */ +#define FW_CFG_SIGNATURE 0x00 +#define FW_CFG_ID 0x01 +#define FW_CFG_FILE_DIR 0x19 + +/* size in bytes of fw_cfg signature */ +#define FW_CFG_SIG_SIZE 4 + +/* fw_cfg "file name" is up to 56 characters (including terminating nul) */ +#define FW_CFG_MAX_FILE_PATH 56 + +/* fw_cfg file directory entry type */ +struct fw_cfg_file { + u32 size; + u16 select; + u16 reserved; + char name[FW_CFG_MAX_FILE_PATH]; +}; + +/* fw_cfg device i/o access options type */ +struct fw_cfg_access { + const char *name; + phys_addr_t base; + u8 size; + u8 ctrl_offset; + u8 data_offset; + bool is_mmio; +}; + +/* table of fw_cfg device i/o access options for known architectures */ +static struct fw_cfg_access fw_cfg_modes[] = { + { + .name = "fw_cfg IOport on i386, sun4u", + .base = 0x510, + .size = 0x02, + .ctrl_offset = 0x00, + .data_offset = 0x01, + .is_mmio = false, + }, { + .name = "fw_cfg MMIO on arm", + .base = 0x9020000, + .size = 0x0a, + .ctrl_offset = 0x08, + .data_offset = 0x00, + .is_mmio = true, + }, { + .name = "fw_cfg MMIO on sun4m", + .base = 0xd00000510, + .size = 0x03, + .ctrl_offset = 0x00, + .data_offset = 0x02, + .is_mmio = true, + }, { + .name = "fw_cfg MMIO on ppc/mac", + .base = 0xf0000510, + .size = 0x03, + .ctrl_offset = 0x00, + .data_offset = 0x02, + .is_mmio = true, + }, { } /* END */ +}; + +/* fw_cfg device i/o currently selected option set */ +static struct fw_cfg_access *fw_cfg_mode; + +/* fw_cfg device i/o register addresses */ +static void __iomem *fw_cfg_dev_base; +static void __iomem *fw_cfg_reg_ctrl; +static void __iomem *fw_cfg_reg_data; + +/* atomic access to fw_cfg device (potentially slow i/o, so using mutex) */ +static DEFINE_MUTEX(fw_cfg_dev_lock); + +/* pick appropriate endianness for selector key */ +static inline u16 fw_cfg_sel_endianness(u16 key) +{ + return fw_cfg_mode->is_mmio ? cpu_to_be16(key) : cpu_to_le16(key); +} + +/* type for fw_cfg "directory scan" visitor/callback function */ +typedef int (*fw_cfg_file_callback)(const struct fw_cfg_file *f); + +/* run a given callback on each fw_cfg directory entry */ +static int fw_cfg_scan_dir(fw_cfg_file_callback callback) +{ + int ret = 0; + u32 count, i; + struct fw_cfg_file f; + + mutex_lock(&fw_cfg_dev_lock); + iowrite16(fw_cfg_sel_endianness(FW_CFG_FILE_DIR), fw_cfg_reg_ctrl); + ioread8_rep(fw_cfg_reg_data, &count, sizeof(count)); + for (i = 0; i < be32_to_cpu(count); i++) { + ioread8_rep(fw_cfg_reg_data, &f, sizeof(f)); + ret = callback(&f); + if (ret) + break; + } + mutex_unlock(&fw_cfg_dev_lock); + return ret; +} + +/* read chunk of given fw_cfg blob (caller responsible for sanity-check) */ +static inline void fw_cfg_read_blob(u16 key, + void *buf, loff_t pos, size_t count) +{ + mutex_lock(&fw_cfg_dev_lock); + iowrite16(fw_cfg_sel_endianness(key), fw_cfg_reg_ctrl); + while (pos-- > 0) + ioread8(fw_cfg_reg_data); + ioread8_rep(fw_cfg_reg_data, buf, count); + mutex_unlock(&fw_cfg_dev_lock); +} + +/* clean up fw_cfg device i/o */ +static void fw_cfg_io_cleanup(void) +{ + if (fw_cfg_mode->is_mmio) { + iounmap(fw_cfg_dev_base); + release_mem_region(fw_cfg_mode->base, fw_cfg_mode->size); + } else { + ioport_unmap(fw_cfg_dev_base); + release_region(fw_cfg_mode->base, fw_cfg_mode->size); + } +} + +/* probe and map fw_cfg device */ +static int __init fw_cfg_io_probe(void) +{ + char sig[FW_CFG_SIG_SIZE]; + + for (fw_cfg_mode = &fw_cfg_modes[0]; + fw_cfg_mode->base; fw_cfg_mode++) { + + phys_addr_t base = fw_cfg_mode->base; + u8 size = fw_cfg_mode->size; + + /* reserve and map mmio or ioport region */ + if (fw_cfg_mode->is_mmio) { + if (!request_mem_region(base, size, fw_cfg_mode->name)) + continue; + fw_cfg_dev_base = ioremap(base, size); + if (!fw_cfg_dev_base) { + release_mem_region(base, size); + continue; + } + } else { + if (!request_region(base, size, fw_cfg_mode->name)) + continue; + fw_cfg_dev_base = ioport_map(base, size); + if (!fw_cfg_dev_base) { + release_region(base, size); + continue; + } + } + + /* set control and data register addresses */ + fw_cfg_reg_ctrl = fw_cfg_dev_base + fw_cfg_mode->ctrl_offset; + fw_cfg_reg_data = fw_cfg_dev_base + fw_cfg_mode->data_offset; + + /* verify fw_cfg device signature */ + fw_cfg_read_blob(FW_CFG_SIGNATURE, sig, 0, FW_CFG_SIG_SIZE); + if (memcmp(sig, "QEMU", FW_CFG_SIG_SIZE) == 0) + /* success, we're done */ + return 0; + + /* clean up before probing next access mode */ + fw_cfg_io_cleanup(); + } + + return -ENODEV; +} + +/* fw_cfg revision attribute, in /sys/firmware/qemu_fw_cfg top-level dir. */ +static u32 fw_cfg_rev; + +static ssize_t fw_cfg_showrev(struct kobject *k, struct attribute *a, char *buf) +{ + return sprintf(buf, "%u\n", fw_cfg_rev); +} + +static const struct { + struct attribute attr; + ssize_t (*show)(struct kobject *k, struct attribute *a, char *buf); +} fw_cfg_rev_attr = { + .attr = { .name = "rev", .mode = S_IRUSR }, + .show = fw_cfg_showrev, +}; + +/* fw_cfg_sysfs_entry type */ +struct fw_cfg_sysfs_entry { + struct kobject kobj; + struct fw_cfg_file f; + struct list_head list; +}; + +/* get fw_cfg_sysfs_entry from kobject member */ +static inline struct fw_cfg_sysfs_entry *to_entry(struct kobject *kobj) +{ + return container_of(kobj, struct fw_cfg_sysfs_entry, kobj); +} + +/* fw_cfg_sysfs_attribute type */ +struct fw_cfg_sysfs_attribute { + struct attribute attr; + ssize_t (*show)(struct fw_cfg_sysfs_entry *entry, char *buf); +}; + +/* get fw_cfg_sysfs_attribute from attribute member */ +static inline struct fw_cfg_sysfs_attribute *to_attr(struct attribute *attr) +{ + return container_of(attr, struct fw_cfg_sysfs_attribute, attr); +} + +/* global cache of fw_cfg_sysfs_entry objects */ +static LIST_HEAD(fw_cfg_entry_cache); + +/* kobjects removed lazily by kernel, mutual exclusion needed */ +static DEFINE_SPINLOCK(fw_cfg_cache_lock); + +static inline void fw_cfg_sysfs_cache_enlist(struct fw_cfg_sysfs_entry *entry) +{ + spin_lock(&fw_cfg_cache_lock); + list_add_tail(&entry->list, &fw_cfg_entry_cache); + spin_unlock(&fw_cfg_cache_lock); +} + +static inline void fw_cfg_sysfs_cache_delist(struct fw_cfg_sysfs_entry *entry) +{ + spin_lock(&fw_cfg_cache_lock); + list_del(&entry->list); + spin_unlock(&fw_cfg_cache_lock); +} + +static void fw_cfg_sysfs_cache_cleanup(void) +{ + struct fw_cfg_sysfs_entry *entry, *next; + + list_for_each_entry_safe(entry, next, &fw_cfg_entry_cache, list) { + /* will end up invoking fw_cfg_sysfs_cache_delist() + * via each object's release() method (i.e. destructor) + */ + kobject_put(&entry->kobj); + } +} + +/* default_attrs: per-entry attributes and show methods */ + +#define FW_CFG_SYSFS_ATTR(_attr) \ +struct fw_cfg_sysfs_attribute fw_cfg_sysfs_attr_##_attr = { \ + .attr = { .name = __stringify(_attr), .mode = S_IRUSR }, \ + .show = fw_cfg_sysfs_show_##_attr, \ +} + +static ssize_t fw_cfg_sysfs_show_size(struct fw_cfg_sysfs_entry *e, char *buf) +{ + return sprintf(buf, "%u\n", e->f.size); +} + +static ssize_t fw_cfg_sysfs_show_key(struct fw_cfg_sysfs_entry *e, char *buf) +{ + return sprintf(buf, "%u\n", e->f.select); +} + +static ssize_t fw_cfg_sysfs_show_name(struct fw_cfg_sysfs_entry *e, char *buf) +{ + return sprintf(buf, "%s\n", e->f.name); +} + +static FW_CFG_SYSFS_ATTR(size); +static FW_CFG_SYSFS_ATTR(key); +static FW_CFG_SYSFS_ATTR(name); + +static struct attribute *fw_cfg_sysfs_entry_attrs[] = { + &fw_cfg_sysfs_attr_size.attr, + &fw_cfg_sysfs_attr_key.attr, + &fw_cfg_sysfs_attr_name.attr, + NULL, +}; + +/* sysfs_ops: find fw_cfg_[entry, attribute] and call appropriate show method */ +static ssize_t fw_cfg_sysfs_attr_show(struct kobject *kobj, struct attribute *a, + char *buf) +{ + struct fw_cfg_sysfs_entry *entry = to_entry(kobj); + struct fw_cfg_sysfs_attribute *attr = to_attr(a); + + return attr->show(entry, buf); +} + +static const struct sysfs_ops fw_cfg_sysfs_attr_ops = { + .show = fw_cfg_sysfs_attr_show, +}; + +/* release: destructor, to be called via kobject_put() */ +static void fw_cfg_sysfs_release_entry(struct kobject *kobj) +{ + struct fw_cfg_sysfs_entry *entry = to_entry(kobj); + + fw_cfg_sysfs_cache_delist(entry); + kfree(entry); +} + +/* kobj_type: ties together all properties required to register an entry */ +static struct kobj_type fw_cfg_sysfs_entry_ktype = { + .default_attrs = fw_cfg_sysfs_entry_attrs, + .sysfs_ops = &fw_cfg_sysfs_attr_ops, + .release = fw_cfg_sysfs_release_entry, +}; + +/* raw-read method and attribute */ +static ssize_t fw_cfg_sysfs_read_raw(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t pos, size_t count) +{ + struct fw_cfg_sysfs_entry *entry = to_entry(kobj); + + if (pos > entry->f.size) + return -EINVAL; + + if (count > entry->f.size - pos) + count = entry->f.size - pos; + + fw_cfg_read_blob(entry->f.select, buf, pos, count); + return count; +} + +static struct bin_attribute fw_cfg_sysfs_attr_raw = { + .attr = { .name = "raw", .mode = 0400 }, + .read = fw_cfg_sysfs_read_raw, +}; + +/* kobjects & kset representing top-level, by_key, and by_name folders */ +static struct kobject *fw_cfg_top_ko; +static struct kobject *fw_cfg_sel_ko; + +/* callback function to register an individual fw_cfg file */ +static int __init fw_cfg_register_file(const struct fw_cfg_file *f) +{ + int err; + struct fw_cfg_sysfs_entry *entry; + + /* allocate new entry */ + entry = kzalloc(sizeof(*entry), GFP_KERNEL); + if (!entry) + return -ENOMEM; + + /* set file entry information */ + entry->f.size = be32_to_cpu(f->size); + entry->f.select = be16_to_cpu(f->select); + strcpy(entry->f.name, f->name); + + /* register entry under "/sys/firmware/qemu_fw_cfg/by_key/" */ + err = kobject_init_and_add(&entry->kobj, &fw_cfg_sysfs_entry_ktype, + fw_cfg_sel_ko, "%d", entry->f.select); + if (err) + goto err_register; + + /* add raw binary content access */ + err = sysfs_create_bin_file(&entry->kobj, &fw_cfg_sysfs_attr_raw); + if (err) + goto err_add_raw; + + /* success, add entry to global cache */ + fw_cfg_sysfs_cache_enlist(entry); + return 0; + +err_add_raw: + kobject_del(&entry->kobj); +err_register: + kfree(entry); + return err; +} + +/* unregister top-level or by_key folder */ +static inline void fw_cfg_kobj_cleanup(struct kobject *kobj) +{ + kobject_del(kobj); + kobject_put(kobj); +} + +static int __init fw_cfg_sysfs_init(void) +{ + int err; + + /* probe for the fw_cfg "hardware" */ + err = fw_cfg_io_probe(); + if (err) + return err; + + /* create /sys/firmware/qemu_fw_cfg/ and its subdirectories */ + err = -ENOMEM; + fw_cfg_top_ko = kobject_create_and_add("qemu_fw_cfg", firmware_kobj); + if (!fw_cfg_top_ko) + goto err_top; + fw_cfg_sel_ko = kobject_create_and_add("by_key", fw_cfg_top_ko); + if (!fw_cfg_sel_ko) + goto err_sel; + + /* get revision number, add matching top-level attribute */ + fw_cfg_read_blob(FW_CFG_ID, &fw_cfg_rev, 0, sizeof(fw_cfg_rev)); + fw_cfg_rev = le32_to_cpu(fw_cfg_rev); + err = sysfs_create_file(fw_cfg_top_ko, &fw_cfg_rev_attr.attr); + if (err) + goto err_rev; + + /* process fw_cfg file directory entry, registering each file */ + err = fw_cfg_scan_dir(fw_cfg_register_file); + if (err) + goto err_scan; + + /* success */ + pr_debug("fw_cfg: loaded.\n"); + return 0; + +err_scan: + fw_cfg_sysfs_cache_cleanup(); + sysfs_remove_file(fw_cfg_top_ko, &fw_cfg_rev_attr.attr); +err_rev: + fw_cfg_kobj_cleanup(fw_cfg_sel_ko); +err_sel: + fw_cfg_kobj_cleanup(fw_cfg_top_ko); +err_top: + fw_cfg_io_cleanup(); + return err; +} + +static void __exit fw_cfg_sysfs_exit(void) +{ + pr_debug("fw_cfg: unloading.\n"); + fw_cfg_sysfs_cache_cleanup(); + fw_cfg_kobj_cleanup(fw_cfg_sel_ko); + fw_cfg_kobj_cleanup(fw_cfg_top_ko); + fw_cfg_io_cleanup(); +} + +module_init(fw_cfg_sysfs_init); +module_exit(fw_cfg_sysfs_exit); -- 2.4.3