May 5, 2016
3:23 p.m.
On Thu, May 05, 2016 at 05:13:49PM +0200, Ahmed Soliman wrote:
I want to port linux to new Ti tiva C TM4C123G it is 80MHZ 32-bit ARM cortex M4 board with FPU 256KB flash /32bit SRAM /2kb EEPROM
That is _very_ small for getting Linux to run on the board, odds are it's impossible. You will need a lot of experience in order to achieve this, I recommend using a board with at least 4Mb of ram in order to get things working at the least. I suggest doing some basic research on what boards and sizes of systems that people have gotten a M4 running Linux on first. good luck! greg k-h