Hi, On 16-02-26 00:55:40, Woody Wu wrote:
Hi,
It seems, at least in 4.4.2 kernel, earlyprintk parameter supports something like 's3c24xx,<addr>'. But I dont know where to find out the addr value of the first uart port on my *s3c2416* based board. Can someone please tell me?
Also, I desire to know if the earlycon parameter supports the Samsung S3C24xx uarts, if so, what should the value of the parameter look like?
Have a look in the documentation here https://www.kernel.org/doc/Documentation/kernel-parameters.txt The kernels kernel-parameter.txt documentation file lists the supported drivers. Generally the UART0 port is used for debugging but I guess there is no such hard and fast rule. For your particular board, you can check which UART port is used as the debug serial console and then get the address for the concerned UART by checking the relevant dtsi file in arch/arm/boot/dts/s3c24xx.dtsi or perhaps one of the exynosX.dtsi files? UART0 port seems to have address of 0x50000000? Regards, Sanchayan.
Thank in advance,
-woody
-- Life is the only flaw in an otherwise perfect nonexistence -- Schopenhauer
woody public key at http://subkeys.pgp.net:11371 (narkewoody@gmail.com)
_______________________________________________ Kernelnewbies mailing list Kernelnewbies@kernelnewbies.org http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies