Hi Mulyadi, On 01/31/2012 04:49 PM, Mulyadi Santosa wrote:
Hi :)
On Tue, Jan 31, 2012 at 11:52, Graeme Russ <graeme.russ@gmail.com> wrote:
So RAM modules not the problem, that leaves CPU, Motherboard and PSU...
So I switched out the PSU - Fail (really quickly this time... interesting)
So that's when I decided to look at the SDRAM voltage - I looked up the datasheet for the RAM and compared it to the BIOS setting... Hmm, right at the upper limit of the spec'd DIMM voltage, so I set it to 1.5V manually.
Since then it has not skipped a beat (only been ~18 hours, but that's way longer than previously)
A very well done trouble shooting! you're lucky that during the
Thanks :)
process, your memory module isn't burn out (voltage overload could do that sometimes AFAIK).
Hmm, the MB voltage was just at the upper limit of the operational voltage - I think the max. rated voltage goes a little higher although there are two voltages that must be kept at correct levels relative to each other (one must always remain less than or equal to the other)
lately many issues surface which tend to has something to do with hardware, for example the excessive power consumption (ASPM). Sensors are all we need. Linux could already fetch numbers from SMART, cpu sensors etc. Maybe we need memory voltage sensors too? :)
Yes, I would love to get all the on-board and on-die sensors working (temperatures, voltages, fan speeds). This is going to be an 'always on' media server which will also operate as a part-time dev machine. I would love to do complete system status logging. Any idea how I could find out what the correct kernel options I need to do so? Regards, Graeme P.S. 24+ hours :)