Hallo Jeffrey, On Thu, Feb 14, 2019 at 02:06:35PM -0500, Jeffrey Walton wrote:
Hi Everyone,
I'm having trouble using a USB modem. It is a Conexant modem but it is not responding to AT commands. Sample code is at https://pastebin.com/84YUn9ey .
I think the first thing I need to do is verify the kernel configuration for the device. For that:
$ sudo setserial -a /dev/ttyACM0 /dev/ttyACM0, Line 0, UART: unknown, Port: 0x0000, IRQ: 0 Baud_base: 115200, close_delay: 12, divisor: 0 closing_wait: 750 Flags: spd_normal
At this point I think I need to read some kernel docs. I'm not sure if I should be in https://www.kernel.org/doc/Documentation/serial or https://www.kernel.org/doc/Documentation/usb . Looking through the pages nothing jumps out as specific to the Conexant.
Maybe these could be interesting? https://www.kernel.org/doc/Documentation/usb/acm.txt https://www.kernel.org/doc/Documentation/usb/gadget_serial.txt
Can someone suggest what my next steps are to verify the modem's configuration with respect to the kernel and driver?
Thanks in advance.
Best regards, Thorsten
_______________________________________________ Kernelnewbies mailing list Kernelnewbies@kernelnewbies.org https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies