Hi All, I was fiddling around with an IR remote driver for my embedded platform to see if I can make the IR LED light (connected to GPIO's) blink on IR activity. The IR driver behaves like a char driver. The way to make the LED on/off is to simply write to some GPIO reg with a 1/0. So I was switching on the LED at the beginning of the function that reads data (in ISR context) and then switching it off at the end of that function. The problem was that all this happens too fats and I'm barely able to see the LED blink (there's only a faint flicker)! :) I tired various places in the driver to keep on/off calls as "far" as possible (ON in ISR and then OFF _after_ a copy_to_user()), but that did not help much. Whats the recommended way of solving this issue? I'm working on drivers after a really long time (last time I worked on a driver was when LDD 2nd ed was published!) so I'm not sure if bottom-halves or work-queues should be used. I was thinking what if I introduce an artificial delay in my driver where I "sleep/wait" for a few millsecs after switching on the LED and then switch it off after the incoming data has been processed. Is that a good idea? TIA, -mandeep