Set the ACPI=on on the cmdline, and the OS can not boot.

[tianlilai]

 Hi,Everyone,I have a problem as follow:

 When I set the ACPI=on on the cmdline,and the OS can not boot(If set ACPI=off, The system is OK). The attachmemt file is the     booting log. Would help me slove this ploblem? Thanks very much.

 Note:kernel version v2.6.18,and the arch is x86_64.

 Regards
 laitianli

-------------- next part --------------
Bootdata ok (command line is ro root=LABEL=/ rhgb console=ttyS0,115200 console=tty1 apic=debug acpi=on)
Linux version 2.6.18-std (laitianli at XCompiler) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-55)) #13 SMP Thu Sep 10 16:35:59 CST 2015
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
 BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bf7a0000 (usable)
 BIOS-e820: 00000000bf7a0000 - 00000000bf7bd000 (ACPI data)
 BIOS-e820: 00000000bf7bd000 - 00000000bf7be000 (ACPI NVS)
 BIOS-e820: 00000000bf7be000 - 00000000bf7ff000 (reserved)
 BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
DMI present.
No NUMA configuration found
Faking a node at 0000000000000000-0000000140000000
Bootmem setup node 0 0000000000000000-0000000140000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 7:14 APIC version 21
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
Processor #2 7:14 APIC version 21
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
Processor #4 7:14 APIC version 21
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
Processor #6 7:14 APIC version 21
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Setting APIC routing to physical flat
ACPI: HPET id: 0x8086a701 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
SMP: Allowing 4 CPUs, 0 hotplug CPUs
Built 1 zonelists.  Total pages: 1028401
Kernel command line: ro root=LABEL=/ rhgb console=ttyS0,115200 console=tty1 apic=debug acpi=on
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
time.c: Detected 2394.071 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x62c0000 - 0xa2c0000
Memory: 4032088k/5242880k available (2276k kernel code, 153244k reserved, 1193k data, 200k init)
Calibrating delay using timer specific routine.. 4791.75 BogoMIPS (lpj=2395878)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
MCE: warning: using only 9 banks
CPU0: Thermal monitoring enabled (TM1)
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
 tbxface-0107 [01] load_tables           : ACPI Tables successfully acquired
Parsing all Control Methods:
Table [DSDT](id 0007) - 513 Objects with 52 Devices 118 Methods 37 Regions
Parsing all Control Methods:
Table [SSDT](id 0004) - 68 Objects with 0 Devices 48 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0005) - 8 Objects with 0 Devices 1 Methods 2 Regions
ACPI Namespace successfully loaded at root ffffffff815aa740
evxfevnt-0089 [02] enable                : Transition to ACPI mode successful
enabled ExtINT on CPU#0
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Using local APIC timer interrupts.
result 8312740
Detected 8.312 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/4 APIC 0x2
Initializing CPU#1
masked ExtINT on CPU#1
Calibrating delay using timer specific routine.. 4787.98 BogoMIPS (lpj=2393991)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
MCE: warning: using only 9 banks
CPU1: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           X3430  @ 2.40GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 2/4 APIC 0x4
Initializing CPU#2
masked ExtINT on CPU#2
Calibrating delay using timer specific routine.. 4787.70 BogoMIPS (lpj=2393851)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
MCE: warning: using only 9 banks
CPU2: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           X3430  @ 2.40GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 3/4 APIC 0x6
Initializing CPU#3
masked ExtINT on CPU#3
Calibrating delay using timer specific routine.. 4787.97 BogoMIPS (lpj=2393987)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
MCE: warning: using only 9 banks
CPU3: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           X3430  @ 2.40GHz stepping 05
Brought up 4 CPUs
testing NMI watchdog ... OK.
migration_cost=19
checking if image is initramfs... it is
Freeing initrd memory: 2487k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000
evgpeblk-0951 [04] ev_create_gpe_block   : GPE 00 to 3F [_GPE] 8 regs on int 0x9
evgpeblk-1048 [03] ev_initialize_gpe_bloc: Found 4 Wake, Enabled 0 Runtime GPEs in this block
Completing Region/Field/Buffer/Package initialization:...........................................................................
Initialized 39/39 Regions 0/0 Fields 31/31 Buffers 5/17 Packages (598 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:.
Executed 1 _INI methods requiring 0 _STA executions (examined 70 objects)
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs<7>Losing some ticks... checking if CPU frequency changed.
 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *9
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
testing the IO APIC.......................

Using vector-based indexing
.................................... done.
hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 64-bit timers, 14318180 Hz
PCI-GART: No AMD northbridge found.
PCI: Bridge: 0000:00:03.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.7
  IO window: 2000-2fff
  MEM window: dc100000-dc1fffff
  PREFETCH window: disabled.
PCI: Ignore bogus resource 6 [0:0] of 0000:11:03.0
PCI: Bridge: 0000:00:1e.0
  IO window: 3000-3fff
  MEM window: dc000000-dc0fffff
  PREFETCH window: d8000000-dbffffff
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 169
GSI 17 sharing vector 0xB1 and IRQ 17
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
GSI 18 sharing vector 0xB9 and IRQ 18
ACPI: PCI Interrupt 0000:00:1c.7[D] -> GSI 19 (level, low) -> IRQ 185
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
Simple Boot Flag at 0x36 set to 0x80
Total HugeTLB memory allocated, 0
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
assign_interrupt_mode Found MSI capability
assign_interrupt_mode Found MSI capability
assign_interrupt_mode Found MSI capability
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: CPU1 (power states: C1[C1] C2[C2])
ACPI: CPU2 (power states: C1[C1] C2[C2])
ACPI: CPU3 (power states: C1[C1] C2[C2])
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x4
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x5
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x6
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x7
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x8
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x9
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0xa
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0xb
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0xc
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0xd
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0xe
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0xf
Real Time Clock Driver v1.12ac
ACPI Error (utglobal-0125): Unknown exception code: 0xFFFFFFF0 [20060707]
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[SERIAL_Log]=[serial8250_init:2644]=NR_IRQS=239
[SERIAL_Log]=[serial8250_init:2648]=1
[SERIAL_Log]=[serial8250_init:2655]=2
[SERIAL_Log]=[serial8250_init:2659]=2.1