Kernel updating : export gpio not working ?

[Mylene Josserand]

Just to update you that I have found my problem !

In my config file, I did not notice that my own board and an other imx27 
board was enabled ! So the gpios configured was the one from this board 
and not mine's (thanks debugfs !). That is why it did not act like I wanted.

Otherwise, the gpios are still exported as "gpioXX" and not with 
"name_of_gpio". The label "name_of_gpio" can be found in the debugfs but 
not printed in the sysfs. I don't know if there is a way to change that, 
I will search for it if I have time.

Best regards,


-- 
Mylène JOSSERAND



Le 27/02/2013 11:51, Mylene Josserand a écrit :
> Hi everyone !
>
>
> I am currently updating the kernel of my company and I have some
> problems about gpios so I am asking you some help ! :)
> I think I am in the good mailist because it is the first time I update a
> kernel and a board configuration ! :D
>
> The previous kernel used was 2.6.31.14 and I am trying to update it to
> last stable version 3.7.9.
>
> In the previous kernel for a "home-made" board (with a IMx27 and a
> ARM9), we used these methods to export gpios in sysfs (for example for
> Gpio OUT) :
>
> mxc_gpio_mode(gpio_number | GPIO_GPIO | GPIO_OUT);
> gpio_request(gpio_number, name_of_gpio);
> gpio_export(gpio_number, 0);
> gpio_direction_output(gpio_number, gpio_value);
>
> In the sysfs, the gpio exported was visible under "name_of_gpio".
>
> Now, if I use the same methods, I can not get anything in sysfs except
> "gpiochip0, gpiochip32" etc.
> I tried to use these functions in a module and I could export a gpio but
> under "gpioXX" and not "name_of_gpio". Moreover, I tried to export a
> gpio using the sysfs interface. I succeeded to export it and set
> direction to "out" but when I try to set the value, it did not work and
> the value is always set to 0 (and this gpio was configured as OUT in the
> board).
>
> I make a diff about the gpio documentation and the old kernel used did
> not seem to have many differences with the new kernel ! There is only
> some methods added such as "gpio_resquest_one" and "gpio_export_link". I
> tried them without good results.
>
>
> What am I doing wrong ?
> What am I missing to make it work ?
> Is there some other configurations to add in the board configuration ?
>
>
> Thank you for any help/explanation !
>
>