Continuous Interrupt Problem

[Sarbojit Ganguly]

Hi Arun,

While I agree to your pointers but he is facing the problem of
"interrupt floods" even before he touches.
IMHO the culprit could be the flag.

On 14 June 2012 12:01, Arun KS <getarunks at gmail.com> wrote:
> Hello Siddharth,
>
> On Thu, Jun 14, 2012 at 10:34 AM, siddharth saxena
> <siddharthsaxena1989 at gmail.com> wrote:
>> Hi all
>>
>> I need help with an issue.
>> I have written a touch driver for a device and used the flag
>> IRQF_TRIGGER_LOW to request irq.
>> Now, when I boot the device, the touch interrupts are coming already without
>> touching the screen.
>> Continuous interrupts are occurring without any touch.
>
> Probably the default state of the gpio pin(which you configured as
> irq) is low. Check your HW schematic.
>
> TSC should have interrupt polarity(Active High/Low), which you have to
> choose depending on your schematic while initiallizing the TSC.
> Also different modes like assert interrupt when finger moving, when
> finger touch, or assert periodically.
>
> Hope these pointer will help you.
>
> Thanks,
> Arun
>
>>
>>
>>
>> --
>> Regards
>> Siddharth Saxena
>>
>>
>> _______________________________________________
>> Kernelnewbies mailing list
>> Kernelnewbies at kernelnewbies.org
>> http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
>>
>
> _______________________________________________
> Kernelnewbies mailing list
> Kernelnewbies at kernelnewbies.org
> http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies



-- 
Regards,
Sarbojit