performance about use Linux as a router

jiangtao.jit jiangtao.jit at gmail.com
Wed Jul 6 07:17:41 EDT 2011


dear all:

i have a x86 PC and i use it as a router
the kernel is 2.6.38

there are two NICs: eth0 and eth1

i configed eth0 as 10.1.0.1
and eth1 as 11.1.0.1
Linux will route between these two cards
and it worked ok in the old days

but recently, i had added a new NIC as eth2 for LAN
so i add a bridge br0 and config it as 10.1.0.1 
then i configed eth0 and eth2 under br0
no ip on eth0 now
like
br0(10.1.0.1)             eth1(11.1.0.1)
     /           \
 eth0          eth2
 |               |
LAN           LAN

i expected that the performance will be better
but unfortunately things become worse

the PC lost packets now

at first, i think maybe there is a loop Under br0, so i disconnected the wire on eth2 or eth0
nothing changed, packets still lost

then i remove br0
config is as before
its'
            eth0(10.1.0.1)          eth1(11.1.0.1)
             |
LAN

then everthing becomes fine, no packet lost

i can't explain why, 
any idea?

thanks




2011-07-06 



jiangtao.jit 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20110706/a30d9182/attachment.html 


More information about the Kernelnewbies mailing list