I am building Kernel 3.9.10 and i have given the following Commands during the Process 1. make mrproper 2. make defconfig 3. make oldconfig 4. make -j 8 5. make modules_install 6. make install on the last step, i face the following error ------------------------------------------------------------------------------- sh /home/temp/Linux_Build/linux-3.9.10/arch/x86/boot/install.sh 3.9.10 arch/x86/boot/bzImage \ System.map "/boot" Kernel image: /boot/vmlinuz-3.9.10 Initrd image: /boot/initrd-3.9.10 Root device: /dev/disk/by-id/ata-HGST_HTS725050A7E630_TF655AY9JP1H5C-part2 (/dev/sda2) (mounted on / as ext4) Resume device: /dev/disk/by-id/ata-HGST_HTS725050A7E630_TF655AY9JP1H5C-part1 (/dev/sda1) find: `/lib/modules/3.9.10/kernel/drivers/scsi': No such file or directory modprobe: Module xhci_hcd not found. WARNING: no dependencies for kernel module 'xhci-hcd' found. modprobe: Module hid_logitech_dj not found. WARNING: no dependencies for kernel module 'hid-logitech-dj' found. Features: acpi plymouth block usb resume.userspace resume.kernel -------------------------------------------------------------------------------------- what could have gone wrong during the process ?
On 30 August 2013 08:17, Arun M Kumar <arunkr.linux@gmail.com> wrote:
I am building Kernel 3.9.10
and i have given the following Commands during the Process
1. make mrproper
2. make defconfig
3. make oldconfig
4. make -j 8
5. make modules_install
6. make install
on the last step, i face the following error
-------------------------------------------------------------------------------
sh /home/temp/Linux_Build/linux-3.9.10/arch/x86/boot/install.sh 3.9.10 arch/x86/boot/bzImage \ System.map "/boot"
Kernel image: /boot/vmlinuz-3.9.10 Initrd image: /boot/initrd-3.9.10 Root device: /dev/disk/by-id/ata-HGST_HTS725050A7E630_TF655AY9JP1H5C-part2 (/dev/sda2) (mounted on / as ext4) Resume device: /dev/disk/by-id/ata-HGST_HTS725050A7E630_TF655AY9JP1H5C-part1 (/dev/sda1) find: `/lib/modules/3.9.10/kernel/drivers/scsi': No such file or directory modprobe: Module xhci_hcd not found. WARNING: no dependencies for kernel module 'xhci-hcd' found. modprobe: Module hid_logitech_dj not found. WARNING: no dependencies for kernel module 'hid-logitech-dj' found. Features: acpi plymouth block usb resume.userspace resume.kernel
--------------------------------------------------------------------------------------
what could have gone wrong during the process ?
It seems that the current current has a module for your hard drive. But in the new kernel, you didn't have it compile. Go in make menuconfig and select to compile it.
Arun, I guess, you need to select the xhci_hcd module in make menuconfig for building it as a module. Here are the steps to do it. Device Drivers ---> [*] USB support ---> Make sure "Support for Host-side USB" is a dynamically loadable module by moving the cursor to that item and hitting the 'm' key. Choose to compile the xHCI (USB 3.0) host controller driver as a module by hitting "m". Turn off (hit "n") on the "USB selective suspend/resume and wakeup" option, since that isn't supported by the driver yet. Turn on debugging for the USB subsystem by hitting "y" on "USB verbose debug messages" and "USB announce new devices". Also turn on the "Debugging for the xHCI host controller" option. Finally EXIT from all the sub sections and SAVE the CONFIG file. I hope, this helps you. Regards, Srinivas G On Fri, Aug 30, 2013 at 10:47 AM, Arun M Kumar <arunkr.linux@gmail.com>wrote:
I am building Kernel 3.9.10
and i have given the following Commands during the Process
1. make mrproper
2. make defconfig
3. make oldconfig
4. make -j 8
5. make modules_install
6. make install
on the last step, i face the following error
-------------------------------------------------------------------------------
sh /home/temp/Linux_Build/linux-3.9.10/arch/x86/boot/install.sh 3.9.10 arch/x86/boot/bzImage \ System.map "/boot"
Kernel image: /boot/vmlinuz-3.9.10 Initrd image: /boot/initrd-3.9.10 Root device: /dev/disk/by-id/ata-HGST_HTS725050A7E630_TF655AY9JP1H5C-part2 (/dev/sda2) (mounted on / as ext4) Resume device: /dev/disk/by-id/ata-HGST_HTS725050A7E630_TF655AY9JP1H5C-part1 (/dev/sda1) find: `/lib/modules/3.9.10/kernel/drivers/scsi': No such file or directory modprobe: Module xhci_hcd not found. WARNING: no dependencies for kernel module 'xhci-hcd' found. modprobe: Module hid_logitech_dj not found. WARNING: no dependencies for kernel module 'hid-logitech-dj' found. Features: acpi plymouth block usb resume.userspace resume.kernel
--------------------------------------------------------------------------------------
what could have gone wrong during the process ?
_______________________________________________ Kernelnewbies mailing list Kernelnewbies@kernelnewbies.org http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
participants (3)
-
Alexandru Juncu -
Arun M Kumar -
Srinivas Ganji