hi
i want to devlop a linux project..which is best use in industries.... i dont hav any idea about where to start...can you provide.....some idea...from where to start... i hav lot of interest..in linux...device driver...
On Sat, Jan 15, 2011 at 9:39 AM, ashutosh mishra < kumarmishra.ashutosh@hotmail.com> wrote:
hi
i want to devlop a linux project..which is best use in industries.... i dont hav any idea about where to start...can you provide.....some idea...from where to start... i hav lot of interest..in linux...device driver...
Repeatedly it has been said on this list PLEASE DO YOUR HOMEWORK(yes, all caps) here is your site: http://kernelnewbies.org/ and if you specifically want some more answers dig here: http://kernelnewbies.org/mailinglistguidelines your question is too vague to be answered, dig more on these sites and then ask specific query.
On Sat, Jan 15, 2011 at 4:02 AM, Anuz Pratap Singh Tomar <chambilkethakur@gmail.com> wrote:
On Sat, Jan 15, 2011 at 9:39 AM, ashutosh mishra <kumarmishra.ashutosh@hotmail.com> wrote:
hi
i want to devlop a linux project..which is best use in industries.... i dont hav any idea about where to start...can you provide.....some idea...from where to start... i hav lot of interest..in linux...device driver...
Hey which kind of project? control ? signals? power management ? automation ?? what architecture arm?? which hardware ?? Focus on what do you want with details and I can help you Regards Victor Rodriguez
Repeatedly it has been said on this list PLEASE DO YOUR HOMEWORK(yes, all caps)
here is your site: http://kernelnewbies.org/
and if you specifically want some more answers dig here: http://kernelnewbies.org/mailinglistguidelines
your question is too vague to be answered, dig more on these sites and then ask specific query.
_______________________________________________ Kernelnewbies mailing list Kernelnewbies@kernelnewbies.org http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
On Sat, Jan 15, 2011 at 8:29 PM, Victor Rodriguez <vm.rod25@gmail.com>wrote:
On Sat, Jan 15, 2011 at 4:02 AM, Anuz Pratap Singh Tomar <chambilkethakur@gmail.com> wrote:
On Sat, Jan 15, 2011 at 9:39 AM, ashutosh mishra <kumarmishra.ashutosh@hotmail.com> wrote:
hi
i want to devlop a linux project..which is best use in industries.... i dont hav any idea about where to start...can you provide.....some idea...from where to start... i hav lot of interest..in linux...device driver...
Hey which kind of project? control ? signals? power management ? automation ?? what architecture arm?? which hardware ??
Focus on what do you want with details and I can help you
Regards
Victor Rodriguez
Repeatedly it has been said on this list PLEASE DO YOUR HOMEWORK(yes, all caps)
here is your site: http://kernelnewbies.org/
and if you specifically want some more answers dig here: http://kernelnewbies.org/mailinglistguidelines
your question is too vague to be answered, dig more on these sites and then ask specific query.
_______________________________________________ Kernelnewbies mailing list Kernelnewbies@kernelnewbies.org http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
_______________________________________________ Kernelnewbies mailing list Kernelnewbies@kernelnewbies.org http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
Hello Everyone, I have been a member of the mailing list for quite a while now.Over a period of time I have seen new people coming in and making valuable contributions.However, I feel in due course we have become a little intolerant towards 'Newbies' - for whom this list is.There is a lot of yelling / shouting happening which ideally shouldn't happen no matter how inappropriate / irrelevant the question is. Please understand : - we are not dealing with the same set of people everytime...new people are joining the list if not everyday perhaps every week.These people come from varied backgrounds, various nationalities, different circumstances, different motives / ambitions, different skillsets, different mindset.They *might* /(might not) follow a set laid down pattern of this mailing list. - Moreover, This list is about Newbies ...people who are just starting out and many of them are just exploring this domain ...not even sure whether they belong here or not.We must be patient with them. *Yelling / shouting will just spread bitterness & resentment and puts so many others on the defensive*.Newbies is all about committing your share of mistakes and learning from them.Serious ones will learn & mature whereas others will join some other stream. - lastly, if one finds a question silly / dumb (which has been asked umpteenth time) ...then to say the least "*Pls don't respond*" to that query.I think no one is indispensable here to have earned the right to shout at people just wanted to make the above stated points so that we continue doing great work...with malice towards none. These points were not meant to offend anyone...if I have I apologies. Regards, Mohit
Well said Mohit, but problem I am having is to find something in the kernel janitor section that's for Newbie but can not find any simple link to click to look at code and adjust and compile. I read all I need already just need to apply myself. Also interesting in wireless devices. Thanks in advance Date: Sun, 16 Jan 2011 11:51:41 +0530 Subject: Re: Regarding Kernel Project From: mohit.varma01@gmail.com To: kernelnewbies@kernelnewbies.org On Sat, Jan 15, 2011 at 8:29 PM, Victor Rodriguez <vm.rod25@gmail.com> wrote: On Sat, Jan 15, 2011 at 4:02 AM, Anuz Pratap Singh Tomar <chambilkethakur@gmail.com> wrote:
On Sat, Jan 15, 2011 at 9:39 AM, ashutosh mishra
<kumarmishra.ashutosh@hotmail.com> wrote:
hi
i want to devlop a linux project..which is best use in industries....
i dont hav any idea about where to start...can you provide.....some idea...from where to start... i hav lot of interest..in linux...device driver...
Hey which kind of project? control ? signals? power management ? automation ?? what architecture arm?? which hardware ?? Focus on what do you want with details and I can help you Regards Victor Rodriguez
Repeatedly it has been said on this list PLEASE DO YOUR HOMEWORK(yes, all caps)
here is your site: http://kernelnewbies.org/
and if you specifically want some more answers dig here: http://kernelnewbies.org/mailinglistguidelines
your question is too vague to be answered, dig more on these sites and then
ask specific query.
_______________________________________________ Kernelnewbies mailing list Kernelnewbies@kernelnewbies.org
http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
_______________________________________________ Kernelnewbies mailing list Kernelnewbies@kernelnewbies.org http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies Hello Everyone, I have been a member of the mailing list for quite a while now.Over a period of time I have seen new people coming in and making valuable contributions.However, I feel in due course we have become a little intolerant towards 'Newbies' - for whom this list is.There is a lot of yelling / shouting happening which ideally shouldn't happen no matter how inappropriate / irrelevant the question is. Please understand : we are not dealing with the same set of people everytime...new people are joining the list if not everyday perhaps every week.These people come from varied backgrounds, various nationalities, different circumstances, different motives / ambitions, different skillsets, different mindset.They might /(might not) follow a set laid down pattern of this mailing list. Moreover, This list is about Newbies ...people who are just starting out and many of them are just exploring this domain ...not even sure whether they belong here or not.We must be patient with them. Yelling / shouting will just spread bitterness & resentment and puts so many others on the defensive.Newbies is all about committing your share of mistakes and learning from them.Serious ones will learn & mature whereas others will join some other stream. lastly, if one finds a question silly / dumb (which has been asked umpteenth time) ...then to say the least "Pls don't respond" to that query.I think no one is indispensable here to have earned the right to shout at people just wanted to make the above stated points so that we continue doing great work...with malice towards none. These points were not meant to offend anyone...if I have I apologies. Regards, Mohit _______________________________________________ Kernelnewbies mailing list Kernelnewbies@kernelnewbies.org http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
how about writing a device driver for those new 3G and 4G wireless devices.. they come with PCIe and USB joining. I don't know if a driver is written for any such device. but these new devices have already started hitting the market, and i would mostly be interested in working on the cheapest of them all. I don't have a laptop right now, but as soon as i get one i would surely want to attach one of these GSM modem in linux. If anyone did decided to work on it, i would love to work together. or if anyone is working on it right now, please let me know --Vinit On Mon, Jan 17, 2011 at 1:54 AM, Pein Junior <salmon2k3@hotmail.com> wrote:
Well said Mohit, but problem I am having is to find something in the kernel janitor section that's for Newbie but can not find any simple link to click to look at code and adjust and compile. I read all I need already just need to apply myself.
Also interesting in wireless devices.
Thanks in advance
------------------------------ Date: Sun, 16 Jan 2011 11:51:41 +0530 Subject: Re: Regarding Kernel Project From: mohit.varma01@gmail.com To: kernelnewbies@kernelnewbies.org
On Sat, Jan 15, 2011 at 8:29 PM, Victor Rodriguez <vm.rod25@gmail.com>wrote:
On Sat, Jan 15, 2011 at 4:02 AM, Anuz Pratap Singh Tomar <chambilkethakur@gmail.com> wrote:
On Sat, Jan 15, 2011 at 9:39 AM, ashutosh mishra <kumarmishra.ashutosh@hotmail.com> wrote:
hi
i want to devlop a linux project..which is best use in industries.... i dont hav any idea about where to start...can you provide.....some idea...from where to start... i hav lot of interest..in linux...device driver...
Hey which kind of project? control ? signals? power management ? automation ?? what architecture arm?? which hardware ??
Focus on what do you want with details and I can help you
Regards
Victor Rodriguez
Repeatedly it has been said on this list PLEASE DO YOUR HOMEWORK(yes, all caps)
here is your site: http://kernelnewbies.org/
and if you specifically want some more answers dig here: http://kernelnewbies.org/mailinglistguidelines
your question is too vague to be answered, dig more on these sites and then ask specific query.
_______________________________________________ Kernelnewbies mailing list Kernelnewbies@kernelnewbies.org http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
_______________________________________________ Kernelnewbies mailing list Kernelnewbies@kernelnewbies.org http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
Hello Everyone,
I have been a member of the mailing list for quite a while now.Over a period of time I have seen new people coming in and making valuable contributions.However, I feel in due course we have become a little intolerant towards 'Newbies' - for whom this list is.There is a lot of yelling / shouting happening which ideally shouldn't happen no matter how inappropriate / irrelevant the question is. Please understand :
- we are not dealing with the same set of people everytime...new people are joining the list if not everyday perhaps every week.These people come from varied backgrounds, various nationalities, different circumstances, different motives / ambitions, different skillsets, different mindset.They *might* /(might not) follow a set laid down pattern of this mailing list. - Moreover, This list is about Newbies ...people who are just starting out and many of them are just exploring this domain ...not even sure whether they belong here or not.We must be patient with them. *Yelling / shouting will just spread bitterness & resentment and puts so many others on the defensive*.Newbies is all about committing your share of mistakes and learning from them.Serious ones will learn & mature whereas others will join some other stream. - lastly, if one finds a question silly / dumb (which has been asked umpteenth time) ...then to say the least "*Pls don't respond*" to that query.I think no one is indispensable here to have earned the right to shout at people
just wanted to make the above stated points so that we continue doing great work...with malice towards none. These points were not meant to offend anyone...if I have I apologies.
Regards,
Mohit
_______________________________________________ Kernelnewbies mailing list Kernelnewbies@kernelnewbies.org http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
_______________________________________________ Kernelnewbies mailing list Kernelnewbies@kernelnewbies.org http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
hi: 2011/1/19 Greg KH <greg@kroah.com>:
On Mon, Jan 17, 2011 at 02:13:30AM +0530, vinit agrawal wrote:
how about writing a device driver for those new 3G and 4G wireless devices..
We should already have drivers for all of these in Linux already. If not, please let me know.
sorry,
greg k-h is there a list that can tell me what brands of wusb that linux support? BTW, where I can find the spec of usb about 3g or 4g are they are the same as wusb?
Thanks a lot, miloody
On Wed, Jan 19, 2011 at 02:46:07PM +0800, loody wrote:
hi:
2011/1/19 Greg KH <greg@kroah.com>:
On Mon, Jan 17, 2011 at 02:13:30AM +0530, vinit agrawal wrote:
how about writing a device driver for those new 3G and 4G wireless devices..
We should already have drivers for all of these in Linux already. If not, please let me know.
sorry,
greg k-h is there a list that can tell me what brands of wusb that linux support?
Nope, but it's pretty much all of them at the moment.
BTW, where I can find the spec of usb about 3g or 4g are they are the same as wusb?
There is no such spec, sorry. And no, it is _very_ different from wusb, thankfully. It's usually a trivial pipe to the device that looks like a cdc-acm modem, or at worse, a usb to serial connection. good luck, greg k-h
4g does not work for Linux. It a USB Modem called: ZTE AX225 USB Modem I have 1 and no 4g wifi for Linux.
Date: Wed, 19 Jan 2011 09:25:59 -0800 From: greg@kroah.com To: miloody@gmail.com Subject: Re: Regarding Kernel Project CC: mohit.varma01@gmail.com; vender007@gmail.com; kernelnewbies@kernelnewbies.org
On Wed, Jan 19, 2011 at 02:46:07PM +0800, loody wrote:
hi:
2011/1/19 Greg KH <greg@kroah.com>:
On Mon, Jan 17, 2011 at 02:13:30AM +0530, vinit agrawal wrote:
how about writing a device driver for those new 3G and 4G wireless devices..
We should already have drivers for all of these in Linux already. If not, please let me know.
sorry,
greg k-h is there a list that can tell me what brands of wusb that linux support?
Nope, but it's pretty much all of them at the moment.
BTW, where I can find the spec of usb about 3g or 4g are they are the same as wusb?
There is no such spec, sorry.
And no, it is _very_ different from wusb, thankfully. It's usually a trivial pipe to the device that looks like a cdc-acm modem, or at worse, a usb to serial connection.
good luck,
greg k-h
_______________________________________________ Kernelnewbies mailing list Kernelnewbies@kernelnewbies.org http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
On Wed, Jan 19, 2011 at 01:27:48PM -0500, Pein Junior wrote:
4g does not work for Linux. It a USB Modem called: ZTE AX225 USB Modem
What is the USB device and vendor id? What have you done to try to make it work? What kernel version? What errors did you get? How did you try to make a network connection? What version of NetworkManager and ModemManager did you use? We need lots more information here to be able to help you out :) thanks, greg k-h
What is the USB device and vendor id?
Hope this manual help explaining all that. http://digicel4gbroadband.com/assets/uploads/WiMAX_USB_Dongle_Modem_G_____AX...
What have you done to try to make it work? What kernel version? What errors did you get?
my USB ports working fine, with the latest kernel and no errors because it didn't show any new hardware connected. And it comes with its own installation when its connected to a windows pc with the ISP name. works on 2.5GHz, they call it WiMax.
On Wed, Jan 19, 2011 at 09:11:53PM -0500, Pein Junior wrote:
What is the USB device and vendor id?
Hope this manual help explaining all that.
http://digicel4gbroadband.com/assets/uploads/WiMAX_USB_Dongle_Modem_G_____AX...
No, what is the output of 'lsusb' with it plugged in?
What have you done to try to make it work? What kernel version? What errors did you get?
my USB ports working fine, with the latest kernel and no errors because it didn't show any new hardware connected. And it comes with its own installation when its connected to a windows pc with the ISP name. works on 2.5GHz, they call it WiMax.
You didn't answer all of the questions :( What does the kernel log show when you plug in the device? Can you send the output of 'dmesg'? Clear out the buffer before you plug it in: dmesg -c then plug in the device, then save the output of the kernel log and send it in your reply to this message: dmesg > kernel_log thanks, greg k-h
On Thu, Jan 20, 2011 at 10:01, Greg KH <greg@kroah.com> wrote:
On Wed, Jan 19, 2011 at 09:11:53PM -0500, Pein Junior wrote:
What is the USB device and vendor id?
Hope this manual help explaining all that.
Guys, I don't wanna ruin your discussion, but don't you think it's OOT now? or are we going to rename this list as chitchat@vger.org? -- regards, Mulyadi Santosa Freelance Linux trainer and consultant blog: the-hydra.blogspot.com training: mulyaditraining.blogspot.com
On Thu, Jan 20, 2011 at 12:32:39PM +0700, Mulyadi Santosa wrote:
On Thu, Jan 20, 2011 at 10:01, Greg KH <greg@kroah.com> wrote:
On Wed, Jan 19, 2011 at 09:11:53PM -0500, Pein Junior wrote:
What is the USB device and vendor id?
Hope this manual help explaining all that.
Guys, I don't wanna ruin your discussion, but don't you think it's OOT now? or are we going to rename this list as chitchat@vger.org?
This is how you both solve bugs, and learn about solving them yourself. I'll be glad to take this to the linux-usb or linux-kernel lists, as this type of conversation is quite common there, so why wouldn't it also be common here? If it's annoying you, I suggest getting a better email client, one that lets you mark any thread as "ignored" so we don't bother you. best of luck, greg k-h
On Sun, Jan 16, 2011 at 9:24 PM, Pein Junior <salmon2k3@hotmail.com> wrote:
Well said Mohit, but problem I am having is to find something in the kernel janitor section that's for Newbie but can not find any simple link to click to look at code and adjust and compile. I read all I need already just need to apply myself.
Well you could start looking at your hardware drivers source code and try to improve it. If you want some code that you can adjust and compile, LDD3 book comes with example drivers for memory devices . Maybe you can start modifiying these drivers to learn how kernel drivers works. I create a project that contains all the LDD3 book examples updated to compile and work with recent kernels, you can find the source code here: https://github.com/martinezjavier/ldd3
Also interesting in wireless devices.
http://wireless.kernel.org/en/developers There you can find todo-list, GSoC ideas and wireless developer summits notes. So you can know what kind of work is needed in the wireless subsystem. -- Best regards, ----------------------------------------- Javier Martínez Canillas (+34) 682 39 81 69
participants (10)
-
Anuz Pratap Singh Tomar -
ashutosh mishra -
Greg KH -
Javier Martinez Canillas -
loody -
Mohit Varma -
Mulyadi Santosa -
Pein Junior -
Victor Rodriguez -
vinit agrawal