Hello, On 15-03-09 21:53:34, chirag garg wrote:
Hello,
On Mon, Mar 9, 2015 at 9:01 PM, <victorascroft@gmail.com> wrote:
Hello,
On 15-03-09 11:20:55, chirag garg wrote:
Hi all,
I am new to the linux kernel source code. I want to compile linux source code for imx6 ARM based platform. I want to generate raw binary image (.bin file) and .dtb file. Can any one help me in this.?
Which iMX6 platform is this? Depending on the platform, it would be as simple as doing make imx_v6_v7_defconfig and then using the correct dtb for the platform. Boards like Nitrogen, Sabre or Wandaboard should boot easily with the recent kernels.
I am using freescale imx6 quad core saberlite board. Available on the freescale site http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX6Q
Where should be this dtb available according to the board. I am trying to boot 3.14 linux kernel.
The DTS files for all ARM boards are available in the following directory http://lxr.free-electrons.com/source/arch/arm/boot/dts/?v=3.14 http://lxr.free-electrons.com/source/arch/arm/configs/imx_v6_v7_defconfig?v=... imx_v6_v7_defconfig is the config file for imx platform. -Regards, Sanchayan.
Do you have a custom board or one of those easily available development platforms?
Board is easily available in the market.
- Regards, Sanchayan..
Thanks in advance Regards
Chirag Garg IIT Madras , Rise Lab
Regards Chirag Garg IIT Madras , Rise Lab
_______________________________________________ Kernelnewbies mailing list Kernelnewbies@kernelnewbies.org http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
Hello , I perform the following steps to run linux kernel on imx6: Download 3.18 kernel from www.kernel.org Make steps: make CROSSarm-linux-gnueabi- ARCH=arm imx_v6_v7_defconfig make CROSS_COMPILE=arm-linux-gnueabi- ARCH=arm uImage LOADADDR=10001000 cp linux-3.18.4/arch/arm/boot/uImage Sd_card Run uImage on the imx6 board... Output : ## Booting kernel from Legacy Image at 10800000 ... Image Name: Linux-3.18.4 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 5445640 Bytes = 5.2 MB Load Address: 10001000 Entry Point: 10001000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... what could be the problem in this ? why Is this kernel not able start on imx6 platform ? Thanks in advance, Regards, Chirag Garg IIT Madras , Rise Lab On Mon, Mar 9, 2015 at 11:01 PM, <victorascroft@gmail.com> wrote:
Hello,
On 15-03-09 21:53:34, chirag garg wrote:
Hello,
On Mon, Mar 9, 2015 at 9:01 PM, <victorascroft@gmail.com> wrote:
Hello,
On 15-03-09 11:20:55, chirag garg wrote:
Hi all,
I am new to the linux kernel source code. I want to compile linux source code for imx6 ARM based platform. I want to generate raw binary image (.bin file) and .dtb file. Can any one help me in this.?
Which iMX6 platform is this? Depending on the platform, it would be as simple as doing make imx_v6_v7_defconfig and then using the correct dtb for the platform. Boards like Nitrogen, Sabre or Wandaboard should boot easily with the recent kernels.
I am using freescale imx6 quad core saberlite board. Available on the freescale site http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX6Q
Where should be this dtb available according to the board. I am trying to boot 3.14 linux kernel.
The DTS files for all ARM boards are available in the following directory
http://lxr.free-electrons.com/source/arch/arm/boot/dts/?v=3.14
http://lxr.free-electrons.com/source/arch/arm/configs/imx_v6_v7_defconfig?v=...
imx_v6_v7_defconfig is the config file for imx platform.
-Regards, Sanchayan.
Do you have a custom board or one of those easily available development platforms?
Board is easily available in the market.
- Regards, Sanchayan..
Thanks in advance Regards
Chirag Garg IIT Madras , Rise Lab
Regards Chirag Garg IIT Madras , Rise Lab
_______________________________________________ Kernelnewbies mailing list Kernelnewbies@kernelnewbies.org http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
participants (2)
-
chirag garg -
victorascroft＠gmail.com