This is dmesg output: New high-speed USB device number 4 using xhci_hcd New USB device found, idVendor=148f, idProduct=761a, bcdDevice = 1.00 New USB device strings: Mfr=1, Product=2, SerialNumber=3 Product: Wifi Manufacter: MediaTek SerialNumber: 1.0 reset high-speed USB device number 4 using xhci_hcd ASIC revision: 76100002 MAC revision: 76502000 mediatek/mt7610e.bin not found, switching to mediatek/mt7610u.bin Direct firmware load for mediatek/mt7610u.bin failed with error -2 probe of 1-1:1.0 failed with error -2 registered new interface driver mt76x0u lsusb output: Bus 001 Device 004: ID 148f:761a Ralink Technology, Corp.
On Sun, Aug 04, 2019 at 01:46:23PM -0400, Pastor Frank Ernesto Ramírez Torres wrote:
This is dmesg output: New high-speed USB device number 4 using xhci_hcd New USB device found, idVendor=148f, idProduct=761a, bcdDevice = 1.00 New USB device strings: Mfr=1, Product=2, SerialNumber=3 Product: Wifi Manufacter: MediaTek SerialNumber: 1.0 reset high-speed USB device number 4 using xhci_hcd ASIC revision: 76100002 MAC revision: 76502000 mediatek/mt7610e.bin not found, switching to mediatek/mt7610u.bin Direct firmware load for mediatek/mt7610u.bin failed with error -2
Please install the linux-firmware package for your system and you should fix this problem. thanks, greg k-h
Thanks to all. Today i will install the firmware package. I will tell you later El lun., 5 de ago. de 2019 12:20 a. m., Greg KH <greg@kroah.com> escribió:
On Sun, Aug 04, 2019 at 01:46:23PM -0400, Pastor Frank Ernesto Ramírez Torres wrote:
This is dmesg output: New high-speed USB device number 4 using xhci_hcd New USB device found, idVendor=148f, idProduct=761a, bcdDevice = 1.00 New USB device strings: Mfr=1, Product=2, SerialNumber=3 Product: Wifi Manufacter: MediaTek SerialNumber: 1.0 reset high-speed USB device number 4 using xhci_hcd ASIC revision: 76100002 MAC revision: 76502000 mediatek/mt7610e.bin not found, switching to mediatek/mt7610u.bin Direct firmware load for mediatek/mt7610u.bin failed with error -2
Please install the linux-firmware package for your system and you should fix this problem.
thanks,
greg k-h
participants (2)
-
Greg KH -
Pastor Frank Ernesto Ramírez Torres