---------- Forwarded message ----------
From: MDaemon at fibcom.com <MDaemon@fibcom.com>
Date: Thu, Feb 10, 2011 at 11:31 AM
Subject: Permanent Delivery Failure
To: mohit89mlnc@gmail.com


The attached message had PERMANENT fatal delivery errors!

After one or more unsuccessful delivery attempts the attached message has
been removed from the mail queue on this server.  The number and frequency
of delivery attempts are determined by local configuration parameters.

YOUR MESSAGE WAS NOT DELIVERED TO ANY OF IT'S RECIPIENTS!

--- Session Transcript ---
 Thu 2011-02-10 11:31:36: Parsing message <xxxxxxxxxxxxxxxxxx\pd50001467261.msg>
 Thu 2011-02-10 11:31:36: *  From: mohit89mlnc@gmail.com
 Thu 2011-02-10 11:31:36: *  To: amit@fibcom.com
 Thu 2011-02-10 11:31:36: *  Subject: module prob
 Thu 2011-02-10 11:31:36: *  Message-ID: <AANLkTi=TTnOfZubXZARJByf8n82r4pXp1shg1j-JsfZR@mail.gmail.com>
 Thu 2011-02-10 11:31:36: *  Route slip host: 202.71.129.104
 Thu 2011-02-10 11:31:36: *  Route slip port: 25
 Thu 2011-02-10 11:31:36: Attempting SMTP connection to [202.71.129.104]
 Thu 2011-02-10 11:31:36: Attempting to send message to smart host
 Thu 2011-02-10 11:31:36: Attempting SMTP connection to [202.71.129.104:25]
 Thu 2011-02-10 11:31:36: Waiting for socket connection...
 Thu 2011-02-10 11:31:36: *  Connection established (192.5.1.2:2559 -> 202.71.129.104:25)
 Thu 2011-02-10 11:31:36: Waiting for protocol to start...
 Thu 2011-02-10 11:31:36: <-- 220 smtp ready smtp.bizmail.net4india.com
 Thu 2011-02-10 11:31:36: --> EHLO fibcom.com
 Thu 2011-02-10 11:31:36: <-- 250-smtp.bizmail.net4india.com Hello fibcom.com [203.101.81.201]
 Thu 2011-02-10 11:31:36: <-- 250-SIZE 57671680
 Thu 2011-02-10 11:31:36: <-- 250-PIPELINING
 Thu 2011-02-10 11:31:36: <-- 250 HELP
 Thu 2011-02-10 11:31:36: --> MAIL From:<mohit89mlnc@gmail.com> SIZE=15160
 Thu 2011-02-10 11:31:36: <-- 250 OK
 Thu 2011-02-10 11:31:36: --> RCPT To:<amit@fibcom.com>
 Thu 2011-02-10 11:31:36: <-- 550 relay not permitted
--- End Transcript ---


--------------------------------------
LEGAL DISCLAIMER
--------------------------------------

The information contained in this message may be privileged and confidential
and protected from disclosure. If the reader of this message is not the intended
recipient, or an employee or agent responsible for delivering this message to the
intended recipient, you are hereby notified that any reproduction, dissemination
or distribution of this communication is strictly prohibited. If you have received
this communication in error, please notify us immediately by replying to the
message and deleting it from your computer.
This mail has been checked for viruses. However recipients should undertake
their own virus check. We will not be liable for any losses

Thank you.

Fibcom India Limited


---------- Forwarded message ----------
From: mohit verma <mohit89mlnc@gmail.com>
To: kernelnewbies@kernelnewbies.org, kernelnewbies <kernelnewbies@nl.linux.org>
Date: Thu, 10 Feb 2011 11:31:32 +0530
Subject: module prob
hi all,
i have written a tiny module . when i install this one i check in dmesg and /proc/kallsyms.
these files shows that the module is currently running .  but when i go for "ohm_inode_permission"  kernel security function in /proc/kallsyms  it does not show that security operation but
that must be registered along with  the registration of module.
i 've attached the source code along with........

i think the problem is while registering the security function ohm_inode_permission (IMHO). but..................
can someone tell me where am i wrong?


--
........................

_______________________________________________
Kernelnewbies mailing list
Kernelnewbies@kernelnewbies.org
http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies