Thanks Daniel.

After creating devices using mknod, it is working on expected lines. After reboot these devices are getting removed and I need to create them manually every time.
Can you please suggest me the procedure to enable it programmatically ? I tried adding CONFIG_DEVTMPFS=y and CONFIG_DEVTMPFS_MOUNT=y in the def config, but no luck.

Thanks
Naresh 

On Wed, Jun 1, 2016 at 8:11 PM, Daniel Baluta <daniel.baluta@gmail.com> wrote:
On Wed, Jun 1, 2016 at 5:26 PM, Munagala Naresh
<munagala.nareshbabu@gmail.com> wrote:
> Thanks for the response.
>
> From the "cat /proc/devices", I could see "iio" listed like this.
>
> / # cat /proc/devices
> cat /proc/devices
> Character devices:
>   1 mem
>   4 /dev/vc/0
>   4 tty
>   5 /dev/tty
>   5 /dev/console
>   5 /dev/ptmx
>  ------
> 250 iio
> 251 pps
>  -----
>
> I could see few other deices @ /dev/xxxx. CONFIG_DEVTMPFS is not set in the
> def config. I will try it by adding "CONFIG_DEVTMPFS=y" and
> "CONFIG_DEVTMPFS_MOUNT=y".

Please don't use top posting.

You can look into /sys/bus/iio/devices/iio:device0/dev and get the
MAJOR and MINOR,
then create the device node manually, using:

mknod /dev/iio:device0 c MAJOR MINOR

Not sure why are you mentioning /proc/devices here.

thanks,
Daniel.



--
Regards
Naresh Babu 
09900139337