<div dir="ltr"><div dir="ltr"><div>Hi all,</div><div><br></div><div>I'm writing a driver for an ePaper display, that will attach via GPIO.</div><div><br></div><div>I've read the docs in Documentation/GPIO, and Documentation/devicetree/bindings/gpio.</div><div><br></div><div>The ePaper itself just has a 34pin flat-flex cable, so people will have to use an adapter board to convert to the GPIO headers for a given system.</div><div><br></div><div>I'd appreciate advice on the best/canonical way to allow userspace to configure the pinout. I read the devicetree docs, but my interpretation was that was more for a somewhat static configuration to be provided by device vendors.</div><div><br></div><div>Many thanks,</div><div>Laurence<br></div></div></div>