<div dir="ltr">I have a smart card reader called SK-284. It support two communication methods, RS232 and USB.<br>In my case only USB is enable. When I connect this device to my Linux laptop, via USB, It wont get detected. I run '$dmesg' command to check on which ttyUSB port it get detected, I got following output,<br>
<br> [ 2321.208330] usb 2-1.2: new full-speed USB device number 7 using ehci_hcd<br> [ 2321.384628] generic-usb 0003:8203:8288.0003: hiddev0,hidraw1: USB HID v1.10 Device [\xffffffe6\xffffffb7\xffffffb1\xffffffb7\xffffffb1\xffffffe5\xffffff9c\xffffffb3\xffffff9c\xffffffb3\xffffffe5\xffffff88\xffffff9b\xffffff88\xffffff9b\xffffffe8\xffffff87\xffffffaa\xffffff87\xffffffaa\xffffffe6\xffffff8a\xffffff80\xffffff8a\xffffff80\xffffffe6\xffffff9c\xffffffaf\xffffff9c\xffffffaf\xffffffe6\xffffff9c\xffffff89\xffffff9c\xffffff89\xffffffe9\xffffff99\xffffff90\xffffff99\xffffff90\xffffffe5\xffffff85\xffffffac\xffffff85\xffffffac\xffffffe5\xffffff8f\xffffffb8\xffffff8f\xffffffb8 CRT450 USB 1.1] on usb-0000:00:1d.0-1.2/input0<br>
[ 2326.634925] usb 2-1.2: USB disconnect, device number 7<br> [ 2326.855479] usb 2-1.2: new full-speed USB device number 8 using ehci_hcd<br> [ 2326.954303] usb 2-1.2: config index 0 descriptor too short (expected 9, got 0)<br>
[ 2326.954310] usb 2-1.2: can't read configurations, error -22<br> [ 2327.027211] usb 2-1.2: new full-speed USB device number 9 using ehci_hcd<br> [ 2327.171371] generic-usb 0003:CEA0:2840.0004: hiddev0,hidraw1: USB HID v1.10 Device [\xffffffe6\xffffffb7\xffffffb1\xffffffb7\xffffffb1\xffffffe5\xffffff9c\xffffffb3\xffffff9c\xffffffb3\xffffffe5\xffffff88\xffffff9b\xffffff88\xffffff9b\xffffffe8\xffffff87\xffffffaa\xffffff87\xffffffaa\xffffffe6\xffffff8a\xffffff80\xffffff8a\xffffff80\xffffffe6\xffffff9c\xffffffaf\xffffff9c\xffffffaf\xffffffe6\xffffff9c\xffffff89\xffffff9c\xffffff89\xffffffe9\xffffff99\xffffff90\xffffff99\xffffff90\xffffffe5\xffffff85\xffffffac\xffffff85\xffffffac\xffffffe5\xffffff8f\xffffffb8\xffffff8f\xffffffb8 CRT284 USB 1.1] on usb-0000:00:1d.0-1.2/input0<br>
<br>My laptop specification:<br>OS: Ubuntu 12.04<br>Kernel: 3.2.0-54-generic-pae<br><br>When I connect same device to Windows 7 and run device manager, It got detected under Human Interface Device (HID). and some test applications are running fine. <br>
<br>My task is to write a small code on Linux to detect the smart card by device. <br>So where do I get to know on which ttyUSB port is used by this device, or any other method to get connected to this device. <br><br>Thanks in advance. <br>
<br></div>