Question regarding Linux-6.3.5 and Sunxi A20 NAND/NFC support
Fawad Lateef
fawadlateef at gmail.com
Mon Aug 14 06:16:09 EDT 2023
Hi Bagas,
On Mon, 14 Aug 2023 at 06:07, Bagas Sanjaya <bagasdotme at gmail.com> wrote:
>
> On Mon, Aug 14, 2023 at 12:40:26AM +0100, Fawad Lateef wrote:
> > Hi,
> >
> > I am trying to make Linux-6.3.5 working on Olimex/Sunxi A20 SOM with NAND.
> >
> > Found that the Sunxi A20 NAND is supported in mainline kernel
> > (drivers/mtd/nand/raw/sunxi_nand.c) and following the guidelines here
> > (https://linux-sunxi.org/Mainline_NAND_Howto); I added the NFC chip
> > pin information in sunxi-a20.dtsi and defined/enabled the nfc
> > controller in the sunxi-a20-olinuxino-micro.dts files.
> >
> > The changes I made are below. Problem is when I define the nfc node
> > entry in dts file "without" pinctrl entry (pinctrl-0 = <&nand_pins_a>,
> > <&nand_cs0_pins_a>, <&nand_rb0_pins_a>;), the sunxi_nfc_probe function
> > is called (though the No NAND chip is detected).
> >
> > And if I define the pinctrl-0 in the nfc node, all I see related to
> > NAND/sunxi in the kernel boot log is this line: platform
> > 1c03000.nand-controller: deferred probe pending.
> >
> > Can someone please guide me why the deferred probe is pending but
> > never call the sunxi_nfc_probe function? And without pinctrl-0 entry
> > why probe function is being called?
> >
> > Seems like I am missing something basic here and any pointers to debug
> > this will be appreciated.
> >
> >
> > --- linux-6.3.5.orig/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
> > 2023-05-30 14:17:29.000000000 +0100
> > +++ linux-6.3.5/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
> > 2023-08-13 23:27:22.405058025 +0100
> > @@ -56,7 +56,7 @@
> >
> > aliases {
> > serial0 = &uart0;
> > - serial1 = &uart6;
> > + serial1 = &uart2;
> > serial2 = &uart7;
> > spi0 = &spi1;
> > spi1 = &spi2;
> > @@ -66,17 +66,6 @@
> > stdout-path = "serial0:115200n8";
> > };
> >
> > - hdmi-connector {
> > - compatible = "hdmi-connector";
> > - type = "a";
> > -
> > - port {
> > - hdmi_con_in: endpoint {
> > - remote-endpoint = <&hdmi_out_con>;
> > - };
> > - };
> > - };
> > -
> > leds {
> > compatible = "gpio-leds";
> > pinctrl-names = "default";
> > @@ -90,16 +79,55 @@
> > };
> > };
> >
> > -&ahci {
> > - target-supply = <®_ahci_5v>;
> > +&nfc {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&nand_pins_a>, <&nand_cs0_pins_a>, <&nand_rb0_pins_a>;
> > status = "okay";
> > +
> > + nand at 0 {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + reg = <0>;
> > + allwinner,rb = <0>;
> > +
> > + nand-ecc-mode = "hw";
> > + nand-on-flash-bbt;
> > + };
> > +
> > + boot0 at 0 {
> > + label = "boot0";
> > + reg = /bits/ 64 <0x0 0x200000>;
> > + };
> > +
> > + boot0-rescue at 200000 {
> > + label = "boot0-rescue";
> > + reg = /bits/ 64 <0x200000 0x200000>;
> > + };
> > +
> > + uboot at 400000 {
> > + label = "uboot";
> > + reg = /bits/ 64 <0x400000 0x200000>;
> > + };
> > +
> > + uboot-rescue at 600000 {
> > + label = "uboot-rescue";
> > + reg = /bits/ 64 <0x600000 0x200000>;
> > + };
> > +
> > + main at 800000 {
> > + label = "main";
> > + reg = /bits/ 64 <0x800000 0xff800000>;
> > + };
> > +
> > };
> >
> > -&codec {
> > +&ahci {
> > + target-supply = <®_ahci_5v>;
> > status = "okay";
> > };
> >
> > &cpu0 {
> > + clock-frequency = <900000000>;
> > cpu-supply = <®_dcdc2>;
> > };
> >
> > @@ -123,34 +151,24 @@
> > status = "okay";
> > };
> >
> > -&hdmi {
> > - status = "okay";
> > -};
> > -
> > -&hdmi_out {
> > - hdmi_out_con: endpoint {
> > - remote-endpoint = <&hdmi_con_in>;
> > - };
> > -};
> > -
> > &i2c0 {
> > - status = "okay";
> > + status = "okay";
> >
> > - axp209: pmic at 34 {
> > - reg = <0x34>;
> > - interrupt-parent = <&nmi_intc>;
> > - interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> > - };
> > + axp209: pmic at 34 {
> > + reg = <0x34>;
> > + interrupt-parent = <&nmi_intc>;
> > + interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> > + };
> > };
> >
> > &i2c1 {
> > - status = "okay";
> > + status = "okay";
> >
> > - eeprom: eeprom at 50 {
> > - compatible = "atmel,24c16";
> > - reg = <0x50>;
> > - pagesize = <16>;
> > - };
> > + eeprom: eeprom at 50 {
> > + compatible = "atmel,24c16";
> > + reg = <0x50>;
> > + pagesize = <16>;
> > + };
> > };
> >
> > &i2c2 {
> > @@ -160,55 +178,6 @@
> > &lradc {
> > vref-supply = <®_vcc3v0>;
> > status = "okay";
> > -
> > - button-191 {
> > - label = "Volume Up";
> > - linux,code = <KEY_VOLUMEUP>;
> > - channel = <0>;
> > - voltage = <191274>;
> > - };
> > -
> > - button-392 {
> > - label = "Volume Down";
> > - linux,code = <KEY_VOLUMEDOWN>;
> > - channel = <0>;
> > - voltage = <392644>;
> > - };
> > -
> > - button-601 {
> > - label = "Menu";
> > - linux,code = <KEY_MENU>;
> > - channel = <0>;
> > - voltage = <601151>;
> > - };
> > -
> > - button-795 {
> > - label = "Search";
> > - linux,code = <KEY_SEARCH>;
> > - channel = <0>;
> > - voltage = <795090>;
> > - };
> > -
> > - button-987 {
> > - label = "Home";
> > - linux,code = <KEY_HOMEPAGE>;
> > - channel = <0>;
> > - voltage = <987387>;
> > - };
> > -
> > - button-1184 {
> > - label = "Esc";
> > - linux,code = <KEY_ESC>;
> > - channel = <0>;
> > - voltage = <1184678>;
> > - };
> > -
> > - button-1398 {
> > - label = "Enter";
> > - linux,code = <KEY_ENTER>;
> > - channel = <0>;
> > - voltage = <1398804>;
> > - };
> > };
> >
> > &gmac_mdio {
> > @@ -239,10 +208,6 @@
> > status = "okay";
> > };
> >
> > -&otg_sram {
> > - status = "okay";
> > -};
> > -
> > &pio {
> > gmac_txerr: gmac-txerr-pin {
> > pins = "PA17";
> > @@ -323,9 +288,9 @@
> > status = "okay";
> > };
> >
> > -&uart6 {
> > +&uart2 {
> > pinctrl-names = "default";
> > - pinctrl-0 = <&uart6_pi_pins>;
> > + pinctrl-0 = <&uart2_pi_pins>;
> > status = "okay";
> > };
> >
> > @@ -352,3 +317,28 @@
> > usb2_vbus-supply = <®_usb2_vbus>;
> > status = "okay";
> > };
> > +
> > +&fe0 {
> > + status = "disabled";
> > +};
> > +
> > +&fe1 {
> > + status = "disabled";
> > +};
> > +
> > +&be0 {
> > + status = "disabled";
> > +};
> > +
> > +&be1 {
> > + status = "disabled";
> > +};
> > +
> > +&tcon0 {
> > + status = "disabled";
> > +};
> > +
> > +&tcon1 {
> > + status = "disabled";
> > +};
> > +
> >
> >
> > --- linux-6.3.5.orig/arch/arm/boot/dts/sun7i-a20.dtsi 2023-05-30
> > 14:17:29.000000000 +0100
> > +++ linux-6.3.5/arch/arm/boot/dts/sun7i-a20.dtsi 2023-08-08
> > 00:30:04.689288733 +0100
> > @@ -345,6 +345,58 @@
> > #size-cells = <0>;
> > };
> >
> > + nand_pins_a: nand_base0 at 0 {
> > + allwinner,pins = "PC0", "PC1", "PC2",
> > + "PC5", "PC8", "PC9", "PC10",
> > + "PC11", "PC12", "PC13", "PC14",
> > + "PC15", "PC16";
> > + allwinner,function = "nand0";
> > + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> > + };
> > +
> > + nand_cs0_pins_a: nand_cs at 0 {
> > + allwinner,pins = "PC4";
> > + allwinner,function = "nand0";
> > + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> > + };
> > +
> > + nand_cs1_pins_a: nand_cs at 1 {
> > + allwinner,pins = "PC3";
> > + allwinner,function = "nand0";
> > + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> > + };
> > +
> > + nand_cs2_pins_a: nand_cs at 2 {
> > + allwinner,pins = "PC17";
> > + allwinner,function = "nand0";
> > + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> > + };
> > +
> > + nand_cs3_pins_a: nand_cs at 3 {
> > + allwinner,pins = "PC18";
> > + allwinner,function = "nand0";
> > + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> > + };
> > +
> > + nand_rb0_pins_a: nand_rb at 0 {
> > + allwinner,pins = "PC6";
> > + allwinner,function = "nand0";
> > + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> > + };
> > +
> > + nand_rb1_pins_a: nand_rb at 1 {
> > + allwinner,pins = "PC7";
> > + allwinner,function = "nand0";
> > + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> > + };
> > +
> > spi0: spi at 1c05000 {
> > compatible = "allwinner,sun4i-a10-spi";
> > reg = <0x01c05000 0x1000>;
> >
> >
>
> Thanks for the suggestion diff. Can you submit it as formal patch against
> current sunxi/for-next tree [1]? See
> Documentation/process/submitting-patches.rst for how to properly submit
> patches.
>
Sorry for my unclear email. I am currently facing issues when trying
to enable and use the MTD driver for A20 SOM (implemented and likely
maintained by Boris Brezillion); I am confused why the probe is not
called in deferred probe case and overall NAND on A20 SOM is not
detected.
I hope to get help in this regard, and of-course as soon as I got it
working, I will submit patches to be included in the kernel and DTS
files.
I am not sure why there are DTS files for A20 SOMs (especially one
sunxi-a20-olinuxino-micro.dts which supposed to have NAND on the SOM)
without any NAND pinctrl and nfc node defined. When the kernel have
driver for it and I assume it should be working.
Added Boris Brezellion in the CC list, hoping to get some pointers and
suggestions from him too.
Thanks
Fawad Lateef
> Thanks.
>
> [1]: https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git/log/?h=sunxi/for-next
>
> --
> An old man doll... just what I always wanted! - Clara
More information about the Kernelnewbies
mailing list