pcie: kernel log - BAR 15: no space for... BAR 15: failed to assign..

Bjorn Helgaas helgaas at kernel.org
Mon Feb 10 17:28:34 EST 2020


On Sun, Feb 09, 2020 at 07:59:41AM +0530, Muni Sekhar wrote:
> Hi all,
> 
> After rebooting the system following messages are seen in dmesg.
> Not sure if these indicate a problem. Can some one look at these and
> confirm if this is problem or can be ignored ?
> 
> Also any suggestions as to what would cause this?
> 
> [    1.084728] pci 0000:00:1c.0: BAR 15: no space for [mem size
> 0x00200000 64bit pref]
> [    1.084813] pci 0000:00:1c.0: BAR 15: failed to assign [mem size
> 0x00200000 64bit pref]
> [    1.084890] pci 0000:00:1c.2: BAR 14: no space for [mem size 0x00200000]
> [    1.084949] pci 0000:00:1c.2: BAR 14: failed to assign [mem size 0x00200000]
> [    1.085037] pci 0000:00:1c.2: BAR 15: no space for [mem size
> 0x00200000 64bit pref]
> [    1.085108] pci 0000:00:1c.2: BAR 15: failed to assign [mem size
> 0x00200000 64bit pref]
> [    1.085199] pci 0000:00:1c.3: BAR 15: no space for [mem size
> 0x00200000 64bit pref]
> [    1.085270] pci 0000:00:1c.3: BAR 15: failed to assign [mem size
> 0x00200000 64bit pref]
> [    1.085343] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
> [    1.085403] pci 0000:00:1c.2: BAR 13: assigned [io  0x2000-0x2fff]
> [    1.085470] pci 0000:00:1c.3: BAR 15: no space for [mem size
> 0x00200000 64bit pref]
> [    1.085540] pci 0000:00:1c.3: BAR 15: failed to assign [mem size
> 0x00200000 64bit pref]
> [    1.085613] pci 0000:00:1c.2: BAR 14: no space for [mem size 0x00200000]
> [    1.085672] pci 0000:00:1c.2: BAR 14: failed to assign [mem size 0x00200000]
> [    1.085738] pci 0000:00:1c.2: BAR 15: no space for [mem size
> 0x00200000 64bit pref]
> [    1.085808] pci 0000:00:1c.2: BAR 15: failed to assign [mem size
> 0x00200000 64bit pref]
> [    1.085884] pci 0000:00:1c.0: BAR 15: no space for [mem size
> 0x00200000 64bit pref]
> [    1.085954] pci 0000:00:1c.0: BAR 15: failed to assign [mem size
> 0x00200000 64bit pref]
> [    1.086026] pci 0000:00:1c.0: PCI bridge to [bus 01]
> [    1.086083] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
> [    1.086144] pci 0000:00:1c.0:   bridge window [mem 0xd0400000-0xd07fffff]

The "no space" and "failed to assign" messages are all for bridge
windows (13 is the I/O window, 14 is the MMIO window, 15 is the MMIO
pref window).  I can't tell if you have any devices below these
bridges (lspci would show them).  If you don't have any devices below
these bridges, you can ignore the messages.

Bjorn



More information about the Kernelnewbies mailing list