Missing FDT description in DTB

[Tomek Domek]

OK I found on my own.
The proper mkimage command is:
./tools/mkimage -A arm -T firmware -C none -O u-boot -a 0x100000 -e 0 -n
"someName" -d u-boot-dtb.bin u-boot.img
without '-f auto and -E'

pt., 6 gru 2019 o 10:03 Tomek Domek <tomekdomek8585 at gmail.com> napisał(a):

> Hi
> I have FSBL and SSBL. SPL uboot starts successfully and u-boot.img is
> loaded successfully but it hangs on 'boot_from_devices' function and
> 'fit_find_config_node':
>
> fit_find_config_node: Missing FDT description in DTB
> No matching DT out of these options:
> Firmware image with one or more FDT blobs
> boot_from_devices error
> SPL: failed to boot from all boot devices
>
> I have suspicion that I wrongly create u-boot.img. My system build do this
> by executing:
>
> ./tools/mkimage -f auto -A arm -T firmware -C none -O u-boot -a 0x100000
> -e 0 -n "someName" -E  -d u-boot-no-dtb.bin u-boot.img  >/dev/null
> The same issue occurs when I use u-boot-dtb.bin version.
> The value 0x100000 is the value stored in CONFIG_SYS_TEXT_BASE.
>
>  And this uboot and spl is somekind of experimental software which is in
> the middle of creation. Could anyone try to guide what might be possible
> the reason of the issue as I am a bit new in u-boot development?
>
> BR
> Tomek
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20191206/8bbad65f/attachment.html>