GPIO Driver for Skylake-Y PCH

[Valentin Vidić]

On Thu, Aug 29, 2019 at 01:49:31PM +0300, Andy Shevchenko wrote:
> This actually should be done other way around, i.e. enabling ACPI WDAT table
> will get you watchdog and this is *highly* recommended way.

If I understand correctly you are suggesting to try the wdat_wdt driver instead?

Discussion about iTCO_wdt problem with Intel NUC is here but no solution so far:

  https://www.spinics.net/lists/linux-watchdog/msg16232.html
  https://www.spinics.net/lists/linux-i2c/msg41504.html

# modprobe i2c_i801
[40450.070587] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[40450.070652] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[40450.072919] iTCO_vendor_support: vendor-support=0
[40450.073485] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[40450.073546] iTCO_wdt iTCO_wdt: can't request region for resource [mem 0x00c5fffc-0x00c5ffff]
[40450.073578] iTCO_wdt: probe of iTCO_wdt failed with error -16

-- 
Valentin