ks7010 firmware upload fail

[Tobin C. Harding]

On Mon, Jun 05, 2017 at 08:07:40PM -0400, Brian Masney wrote:
> On Mon, Jun 05, 2017 at 08:24:44PM +1000, Tobin C. Harding wrote:
> > On Mon, Jun 05, 2017 at 09:22:12AM +0200, Wolfram Sang wrote:
> > > Tobin,
> > > 
> > > > My question is should I be digging further into the MMC code or be doing
> > > > something else with the driver code?
> > > 
> > > So, you haven't found any branch that worked? No plain v4.9 or the
> > > gen3-sdio branch from my tree?
> > 
> > I have not tried cloning your tree. I am using the Rasperry Pi kernel
> > source
> > 
> > https://github.com/raspberrypi/linux
> > 
> > which is v4.9.29
> 
> Hi Tobin,
> 
> Here are some instructions on how to compile an upstream kernel for a
> Raspberry Pi: http://elinux.org/RPi_Upstream_Kernel_Compilation.
> It describes setting up u-boot as the boot loader instead of the
> boot loader that the Raspberry Pi kernel uses. One gotcha to be aware of
> is that the config.txt file on the sd card won't be used.

Thanks Brian.