[PATCH v2 0/3] SysFS driver for QEMU fw_cfg device

[Gabriel L. Somlo]

Hi Ard,

On Wed, Aug 19, 2015 at 11:42:02AM +0200, Ard Biesheuvel wrote:
> (missed some cc's)
> 
> On 19 August 2015 at 11:38, Ard Biesheuvel <ard.biesheuvel at linaro.org> wrote:
> > From: "Gabriel L. Somlo" <somlo at cmu.edu>
> >> Several different architectures supported by QEMU are set up with a
> >> "firmware configuration" (fw_cfg) device, used to pass configuration
> >> "blobs" into the guest by the host running QEMU.
> >>
> >> Historically, these config blobs were mostly of interest to the guest
> >> BIOS, but since QEMU v2.4 it is possible to insert arbitrary blobs via
> >> the command line, which makes them potentially interesting to userspace
> >> (e.g. for passing early boot environment variables, etc.).
> >>
> >
> > Does 'potentially interesting' mean you have a use case? Could you elaborate?

My personal one would be something like:

cat > guestinfo.txt << EOT
  KEY1="val1"
  KEY2="val2"
  ...
EOT

qemu-system-x86_64 ... -fw-cfg name="opt/guestinfo",file=./guestinfo.txt ...

Then, from inside the guest:

  . /sys/firmware/qemu_fw_cfg/by_name/opt/guestinfo/raw

  do_something_with $KEY1 $KEY2
  ...

But I'm thinking this is only one of the many positive things one
could do with the ability to access random host-supplied blobs from
guest userspace :)

> >>   1/3 - probes for the qemu fw_cfg device in locations known to work on
> >>       the supported architectures, in decreasing order of "likelihood".
> >>
> >>       While it *may* be possible to detect the presence of fw_cfg via
> >>       acpi or dtb (on x86 and arm, respectively), there's no way I know
> >>       of attempting that on sun4 and ppc/mac, so I've stuck with simply
> >>       probing (the fw_cfg_modes[] structure and fw_cfg_io_probe() function)
> >>       in fw_cfg.c. I could use some advice on how else that could be
> >>       done more elegantly, if needed.
> >>
> >
> > Sorry, but this is really out of the question, at least on ARM, but surely on
> > other architectures as well. You can't just go around and probe random memory
> > addresses. Perhaps QEMU tolerates it, but on anything that resembles a real
> > system, this will immediately blow up. Also, what happens if the QEMU memory
> > map changes? Add more probes addresses?
> >
> > It is not /that/ difficult to simply wire it up to the DT and ACPI
> > infrastructures, there are plenty of examples in the kernel tree how to
> > accomplish that. As a bonus, it removes all the arch specific knowledge
> > from your code, which means that if QEMU grows support for another DT or
> > ACPI based architecture, it will just work.

I was *hoping* a successful call to request_[mem_]region() will be
enough in the way of asking for permission before probing for the
fw_cfg registers, but I realize that might still not be polite enough :)

DT on ARM is fine, and I'm certainly happy to learn how to do it (even
though my main focus is, for now, x86). The unfortunate thing though
is that on x86, fw_cfg is *not* AFAICT in ACPI, so I'd have to detour into
first adding it in on the host side, before I can rewrite the guest side
driver to look it up in there :)

> > I am not sure how relevant sun4 and ppc/mac are for what you are trying to
> > accomplish, but perhaps it would be best to focus on x86 and ARM for now
> > and do it correctly. If the probing is actually needed, you can always add
> > it later.

I guess that's the direction things seem to be headed, although it would
make me a bit sad to leave out sun and ppc right from the very beginning :) 


Thanks,
--Gabriel

PS. If you have one .c file in the kernel which does any of the DT-on-arm
boilerplate I'm supposed to immitate, I'd appreciate the shortcut :)

PS2. Do you happen to be in Seattle right now ? :)