kernel build error
Kumar amit mehta
gmate.amit at gmail.com
Mon Mar 25 01:04:25 EDT 2013
On Sun, Mar 24, 2013 at 12:49:55PM +0700, Mulyadi Santosa wrote:
> On 3/22/13, Kumar amit mehta <gmate.amit at gmail.com> wrote:
> > I've uploaded the kernel configuration and the screenshot in google drive
> > [1].
>
> ok let's see........... hmmm, stuck during I/O memory mapping?.....
> sadly, no further info that explains the reason why it stuck there....
>
> > Just to be a little more verbose, I've listed below the steps that I follow
> > to
> > build and boot from the newly built kernel on my ubuntu box:
> >
> > $ sudo apt-get install build-essential
> > $ make oldconfig
> > $ make -jX all ;;Where X= Number of CPU cores
>
> somewhere I've read that to make sure compilation goes without any
> glitches, better run without any -j at all.
>
> > $ sudo make modules_install install
>
> regarding kernel image install, I usually do manual copy to /boot and
> adjust Grub config manually.
>
> Then when it comes to modules compilation and installation, usually I do :
> sudo make modules
> sudo make modules_install
>
>
> > $ sudo update-grub
> > $ sudo shutdown -y now
>
> try not using "quiet" kernel parameter, in case you currently use it.
> check /etc/default/grub..... and re run update-grub.
>
Thank you so much for your help.
Meanwhile I have updated my workspace with the latest linux-next tree and will
later try out the options that you've mentioned.
-Amit
More information about the Kernelnewbies
mailing list