test jiffies on ARM SMP board

[bill4carson]

On 2013年02月21日 00:39, buyitian wrote:
> i am confused about my test. in one device driver,
> i put below code:
>
>      printk("start to test test jiffies\n");
>
>      local_irq_save(flags);
>
>      jf1 = jiffies; // read jiffies first time
>
>      // hold cpu for about 2 seconds(do some calculation)
>
>      jf2 = jiffies; // read jiffies after 2 seconds
>
>      local_irq_restore(flags);
>
>      printk("jf1:%lu, jf2:%lu\n", jf1, jf2);
>
> and the output is as below:
>
>      <4>[  108.551124]start to test test jiffies
>      <4>[  110.367604]jf1:4294948151, jf2:4294948151
>
> the jf1 and jf2 are the same value, although they are
> read between 2 seconds interval, i think this is because
> i disabled local interrupt.
> but the printk timestamp is from 108.551124 to 110.367604,
> which is about 2 seconds. and on my platform, printk timestamp
> is got from the function read_sched_clock:
>     static u32 __read_mostly (*read_sched_clock)(void) = jiffy_sched_clock_read;
>
> and function jiffy_sched_clock_read() is to read from jiffies.
>
> it seems that the jiffies is frozen when local irq is disabled,
> but after local_irq_restore(), the jiffies not only start
> to run, but also recover the lost 2 seconds.
>
> is the jiffies updated from another cpu when irq is disabled on
> local cpu?
>
> is there some internel processor interrupt between cpu1 and cpu0
> after local irq is re-enabled so that jiffies recover the lost 2 seconds?


  80 /*
  81  * Event handler for periodic ticks
  82  */
  83 void tick_handle_periodic(struct clock_event_device *dev)
  84 {
  85     int cpu = smp_processor_id();
  86     ktime_t next;
  87
  88     tick_periodic(cpu);
  89
  90     if (dev->mode != CLOCK_EVT_MODE_ONESHOT)
  91         return;
  92     /*
  93      * Setup the next period for devices, which do not have
  94      * periodic mode:
  95      */
  96     next = ktime_add(dev->next_event, tick_period);
  97     for (;;) {
  98         if (!clockevents_program_event(dev, next, ktime_get()))   <--- once irq enabled, here we got -ETIME, then
  99             return;
100         /*
101          * Have to be careful here. If we're in oneshot mode,
102          * before we call tick_periodic() in a loop, we need
103          * to be sure we're using a real hardware clocksource.
104          * Otherwise we could get trapped in an infinite
105          * loop, as the tick_periodic() increments jiffies,
106          * when then will increment time, posibly causing
107          * the loop to trigger again and again.
108          */
109         if (timekeeping_valid_for_hres())
110             tick_periodic(cpu);                                  <---- here, we add missing jiffies
111         next = ktime_add(next, tick_period);
112     }
113 }



  		 	   		
> _______________________________________________
> Kernelnewbies mailing list
> Kernelnewbies at kernelnewbies.org
> http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
>

-- 
八百里秦川尘土飞扬,三千万老陕齐吼秦腔。

--bill