test jiffies on ARM SMP board
anish kumar
anish198519851985 at gmail.com
Wed Feb 20 12:24:41 EST 2013
On Thu, 2013-02-21 at 00:39 +0800, buyitian wrote:
> i am confused about my test. in one device driver,
> i put below code:
>
> printk("start to test test jiffies\n");
>
> local_irq_save(flags);
>
> jf1 = jiffies; // read jiffies first time
>
> // hold cpu for about 2 seconds(do some calculation)
>
> jf2 = jiffies; // read jiffies after 2 seconds
>
> local_irq_restore(flags);
>
> printk("jf1:%lu, jf2:%lu\n", jf1, jf2);
>
> and the output is as below:
>
> <4>[ 108.551124]start to test test jiffies
> <4>[ 110.367604]jf1:4294948151, jf2:4294948151
>
> the jf1 and jf2 are the same value, although they are
> read between 2 seconds interval, i think this is because
> i disabled local interrupt.
> but the printk timestamp is from 108.551124 to 110.367604,
> which is about 2 seconds. and on my platform, printk timestamp
> is got from the function read_sched_clock:
> static u32 __read_mostly (*read_sched_clock)(void) = jiffy_sched_clock_read;
>
> and function jiffy_sched_clock_read() is to read from jiffies.
>
> it seems that the jiffies is frozen when local irq is disabled,
> but after local_irq_restore(), the jiffies not only start
> to run, but also recover the lost 2 seconds.
>
> is the jiffies updated from another cpu when irq is disabled on
> local cpu?
>
> is there some internel processor interrupt between cpu1 and cpu0
> after local irq is re-enabled so that jiffies recover the lost 2 seconds?
I think it is because of the fact that some RTC registers keep the
elapsed time and when the irq is re-enabled the kernel reads these
registers to be in sync with time.
However I am not that sure which registers as I think that depends on
the RTC chip and chip changes based on different boards.
I hope some expert on these matters can pitch in here.
> _______________________________________________
> Kernelnewbies mailing list
> Kernelnewbies at kernelnewbies.org
> http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
More information about the Kernelnewbies
mailing list