Query on linker scripts
Pranay Kumar Srivastava
Pranay.Shrivastava at hcl.com
Sat Mar 24 14:45:20 EDT 2012
On 03/24/2012 11:52 PM, Pranay Kumar Srivastava wrote:
>
> ________________________________________
> From: kernelnewbies-bounces+pranay.shrivastava=hcl.com at kernelnewbies.org [kernelnewbies-bounces+pranay.shrivastava=hcl.com at kernelnewbies.org] On Behalf Of kernelnewbies-request at kernelnewbies.org [kernelnewbies-request at kernelnewbies.org]
> Sent: Saturday, March 24, 2012 9:30 PM
> To: kernelnewbies at kernelnewbies.org
> Subject: Kernelnewbies Digest, Vol 16, Issue 29
>
> Send Kernelnewbies mailing list submissions to
> kernelnewbies at kernelnewbies.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
> or, via email, send a message with subject or body 'help' to
> kernelnewbies-request at kernelnewbies.org
>
> You can reach the person managing the list at
> kernelnewbies-owner at kernelnewbies.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Kernelnewbies digest..."
>
>
> Today's Topics:
>
> 1. Query on linker scripts (Vaibhav Jain)
> 2. Re: Query on linker scripts (Carlo Caione)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 23 Mar 2012 21:43:40 -0700
> From: Vaibhav Jain<vjoss197 at gmail.com>
> Subject: Query on linker scripts
> To: kernelnewbies at kernelnewbies.org
> Message-ID:
> <CAKuUYSw=_zZykPWeTbJsGEYPPSroWK+whm0o5L_PnCManVcrng at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hi,
>
> Recently I have started reading tutorials for writing a small kernel. All
> such tutorials mention use of linker scripts. I have
> read few articles on linker scritps but I am stuck on one thing. I am
> unable to understand the use of defining new symbols in linker scripts.
> Using a linker script to arrange different sections in the object file is
> understandable but defining symbols which are not referenced anywhere in
> the script
> is confusing. An example is the use of symbols sbss and ebss in the bss
> section as show in the script below
>
>
> ENTRY (loader)
> SECTIONS
> {
> . = 0x00100000;
> .text ALIGN (0x1000) :
> {
> *(.text)
> }
> .rodata ALIGN (0x1000) :
> {
> *(.rodata*)
> }
> .data ALIGN (0x1000) :
> {
> *(.data)
> }
> .bss :
> {
> sbss = .;
> *(COMMON)
> *(.bss)
> ebss = .;
> }
> }
>
> Please explain how defining such symbols is useful.
>
> Thanks
> Vaibhav Jain
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20120323/6e1741da/attachment-0001.html
>
> ------------------------------
>
> Message: 2
> Date: Sat, 24 Mar 2012 16:26:38 +0100
> From: Carlo Caione<carlo.caione at gmail.com>
> Subject: Re: Query on linker scripts
> To: Vaibhav Jain<vjoss197 at gmail.com>
> Cc: kernelnewbies at kernelnewbies.org
> Message-ID:<4F6DE7AE.9070808 at gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> On 24/03/2012 05:43, Vaibhav Jain wrote:
>> Hi,
> [cut]
>> is confusing. An example is the use of symbols sbss and ebss in the bss
>> section as show in the script below
>> ENTRY (loader)
>> SECTIONS
>> {
>> . = 0x00100000;
>> .text ALIGN (0x1000) :
>> {
>> *(.text)
>> }
>> .rodata ALIGN (0x1000) :
>> {
>> *(.rodata*)
>> }
>> .data ALIGN (0x1000) :
>> {
>> *(.data)
>> }
>> .bss :
>> {
>> sbss = .;
The sbss will tell you the start of the section bss.
>> *(COMMON)
>> *(.bss)
>> ebss = .;
The ebss will tell you the end of the section bss. The use of these symbols is since you'd like to have the kernel's section be safe from every other process.
This way you can know where your kernel code starts and ends. So you can set up the pages( ptes and pgds as well) in a sensible manner for your kernel.
So in the above case you'd have like two variables in your C code like extern long sbss,ebss and then to get the location where the bss begins you'd do &sbss while to get its ending address you'd do &ebss. So when you subtract these two that should give you the size of your bss section.
However you should do ebss=. after your .bss section and make it ALIGN(0x1000) like others so you get page aligned section values cuz it makes easier to arrange for the pte and pgd for kernel. Also you should set the GDT values for kernel only code separately accordingly from the values you get after an initial temporary GDT has been setup earlier by GRUB or by you.
More appropriate would be to get the size of text and data sections as well since you wouldn't want to accidentally bump into kernel code.
>> }
>> }
>
> I'm not sure if you are OT, anyway...
>
> i.e. they are useful if you want to clear the bss section before execution.
>
> [snippet for ARM proc]
> ...
> ldr r2, =_sbss
> b LoopFillZerobss
> /* Zero fill the bss segment. */
> FillZerobss:
> movs r3, #0
> str r3, [r2], #4
>
> LoopFillZerobss:
> ldr r3, = _ebss
> cmp r2, r3
> bcc FillZerobss
> ...
>
> --
> Carlo Caione
>
>
>
> ------------------------------
>
> _______________________________________________
> Kernelnewbies mailing list
> Kernelnewbies at kernelnewbies.org
> http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
>
>
> End of Kernelnewbies Digest, Vol 16, Issue 29
> *********************************************
::DISCLAIMER::
-----------------------------------------------------------------------------------------------------------------------
The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only.
It shall not attach any liability on the originator or HCL or its affiliates. Any views or opinions presented in
this email are solely those of the author and may not necessarily reflect the opinions of HCL or its affiliates.
Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of
this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have
received this email in error please delete it and notify the sender immediately. Before opening any mail and
attachments please check them for viruses and defect.
-----------------------------------------------------------------------------------------------------------------------
More information about the Kernelnewbies
mailing list