USB Scanner driver

[Manavendra Nath Manav]

Hi All,

I have connected Metrologic USB Scanner, but Fedora is not able to attach a
driver to it. Is there a generic USB scanner driver which I can associate
with it to make it work? This scanner is HID compliant device. Can't I make
usbhid driver to make the scanner work? The sources from Metrologic said
that it should work in USB Keyboard emulation mode. How to enable this?

<<< dmesg snip >>>
[ 7002.199153] usb 8-2: new low speed USB device using uhci_hcd and address
18
[ 7002.373938] usb 8-2: New USB device found, idVendor=0c2e, idProduct=0200
[ 7002.373943] usb 8-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 7002.373946] usb 8-2: Product: Honeywell Scanning and Mobility Scanner
[ 7002.373949] usb 8-2: Manufacturer: Honeywell Scanning and Mobility
[ 7002.399070] input: Honeywell Scanning and Mobility Honeywell Scanning
and Mobility Scanner as
/devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input13
[ 7002.399170] generic-usb 0003:0C2E:0200.000B: input,hidraw2: USB HID
v1.11 *Keyboard* [Honeywell Scanning and Mobility Honeywell Scanning and
Mobility Scanner] on usb-0000:00:1d.2-2/input0
[ 7008.463407] usb 8-2: USB disconnect, address 18
[ 7011.780271] usb 8-2: new low speed USB device using uhci_hcd and address
19
[ 7011.957957] usb 8-2: New USB device found, idVendor=0c2e, idProduct=0720
[ 7011.957962] usb 8-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 7011.957965] usb 8-2: Product: Honeywell Scanning and Mobility Scanner
[ 7011.957968] usb 8-2: Manufacturer: Honeywell Scanning and Mobility

[root at pe1800xs ~]# cat /proc/bus/usb/devices

T:  Bus=08 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 19 Spd=1.5 MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0c2e ProdID=0720 Rev= 1.00
S:  Manufacturer=Honeywell Scanning and Mobility
S:  Product=Honeywell Scanning and Mobility Scanner
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=450mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 *Driver=(none)*
E:  Ad=02(O) Atr=03(Int.) MxPS=   8 Ivl=10ms
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=10ms

-- 
Thanks & Regards,
Manavendra Nath Manav
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20120228/30e81f99/attachment-0001.html