ARM Cross Compilation Toolchain on x86 machine

[vinit agrawal]

try this... its a different toolchain based on GCC

http://www.codesourcery.com/sgpp/lite/arm

--Vinit

On Thu, Jan 6, 2011 at 9:08 PM, Madhavi Manchala <madhavi.linux at gmail.com>wrote:

> Dear All,
>
> We are unable to build the ARM cross compilation tools for
> arm-elf-gcc-3.4.3 on my x86 machine on which we installed the Ubuntu
> 9.10 distribution OS with 2.6.35 kernel version. The gcc version on
> x86 machine is 4.3.3. We need to compile some sources on my x86
> machine for our target machine which is based on ARM architecture. We
> have gone through following links to build the cross compilation tools
> for arm-elf-gcc 3.4.3 on my x86 machine.
>
> http://www.ailis.de/~k/archives/19-ARM-cross-compiling-howto.html
> http://www.kegel.com/crosstool/current/doc/crosstool-howto.html
> http://www.kegel.com/crosstool/
>
> Unfortunately we end up with different types of errors. When we fix
> one error then we get another new error. We tried in different ways to
> build the tools on my x86 machine. There is no luck at all. We also
> gone through the http://www.gnuarm.com/ site and downloaded the
> binaries for gcc 3.4. toolchain. However, we did not find any README
> for how to use these binaries.
>
> Please let us know if there is any clean procedure/document/link for
> building/using the arm-elf-gcc 3.4.3 toolchain on my x86 machine.
>
> Any help would be greatly appreciated and help us a lot.
>
> Thanks and Regards,
> Madhavi M.
>
> _______________________________________________
> Kernelnewbies mailing list
> Kernelnewbies at kernelnewbies.org
> http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20110106/4d5cca95/attachment.html